The gateway to Europe's
integrated metrology community.

The list shows all projects coordinated within the Technical Committee for Flow.

TC Flow Projects

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
F 1020 2006-04-01 Coriolis Mass Flow Meter as transfer standard for multiple fluids VSL completed Research
F 1270 2013-04-15 Determination of exemplary dataset of spatial fluid velocity profiles and components of the turbulent Reynolds stress tensor in air and water downstream to special pipe configuration PTB ongoing Research
F 1312 2014-07-01 Development of a guide one air speed calibration solid anemometers BEV/E+E completed Consultation
F 187 1990-01-01 Development of miniaturized optical flowmeters PTB completed Research
F 1595 2023-09-20 EURAMET Calibration guideline for the evaluation of flow-related quantities in microfluidic devices IPQ in progress Consultation
F 1552 2022-04-01 EURAMET Calibration guideline on the calibration of drug delivery devices IPQ completed Consultation
F 1301 2014-01-01 EUREGA-1 FORCE ongoing Research
F 1201 2010-11-01 Evaluation of a comparison between PTB and NEL in water flow rates from 30 m³/h to 220 m³/h PTB completed Comparison
F 1525 2021-06-01 Evaluation of repeatability measurement procedures in gravimetric volume calibrations of glassware IPQ completed Research
F 1431 2018-01-04 Experimental study of blockage effect in wind tunnels for calibrations of anemometers CMI completed Research
F 1588 2022-04-01 Explaining the process of revision of volume standards ISO 8655 and ISO 4787 IPQ completed Consultation
F 271 1993-01-01 Flowmeter installation effect in gases PTB completed Research
F 1184 2010-03-01 Gravimetric Calibration of a 100 ml Volumetric Flask EIM completed Comparison
F 1295 2014-04-01 Guide on the calibration, operation and handling of micropipettes EIM completed Consultation
F 1454 2018-09-01 Guideline on the Calibration of Solid Anemometers - Part 2: Thermal Anemometers BEV/E+E completed Consultation
F 1158 2010-03-01 Harmonization of the uncertainty budget and calibration method for volumetric volume calibration MIRS completed Research
F 1025 2008-06-30 Harmonization of the uncertainty budget for gravimetric volume calibration IPQ concluded Research
F 1267 2013-03-12 Harmonization of the uncertainty budgets and calibration methods for liquid flow standards LNE-CETIAT completed Research
F 572 2000-05-01 Hydrocarbon intercomparison of 100 - 150 mm turbine meter calibrations NEL completed Comparison
F 1565 2022-09-01 Insertion depth effect for vane anemometers CMI in progress Research
F 854 2003-07-01 Installation effects with decrease the accuracy of water measurements BEV completed Research
F 1157 2010-07-01 Inter-comparison of 1000 L proving tank IPQ completed Comparison EURAMET.M.FF-S6
F 1479 2019-11-01 Inter-comparison of 1000 L proving tank MIRS completed Comparison EURAMET.M.FF-S14
F 1469 2019-07-01 Inter-comparison of calibration of a turbine gas meter G6500 CMI completed Comparison
F 1046 2008-05-19 Inter-comparison of electromagnetic flow-meters CMI completed Comparison EURAMET.M.FF-S2
F 1518 2021-02-02 Inter-comparison of gas provers in the gas flow range 0,25 m3/h to 25 m3/h BEV in progress Comparison
F 863 2005-08-01 Inter-comparison on Water/heat meters at 50 °C for 50mm pipe RISE completed Comparison
F 1296 2014-03-17 Inter-laboratory calibration comparison of a rotary piston gas meter G650 CMI completed Comparison
F 862 2006-03-27 Inter-laboratory calibration comparison of the turbine gas meter G650 CMI completed Comparison
F 1006 2008-04-01 Inter-laboratory calibration comparison of the turbine gas meter in flow rates from 1000 m3/h to 10000 m3/h CMI completed Comparison
F 1024 2008-05-01 Inter-laboratory comparison of primary low pressure gas flow standards from 25 l/min to 100 l/min MIKES completed Comparison
F 514 1999-02-01 Intercomparison of anemometer test facilities using thermal anemometers and mechanical anemometers VSL completed Comparison EUROMET.M.FF-S4
F 388 1996-09-01 Intercomparison of anemometers METAS completed Comparison
F 425 1997-09-01 Intercomparison of Bell Provers using a transfer meter NEL completed Comparison
F 831 2004-01-01 Intercomparison of calibration of master meters installed in a test rig, by two independent test methods (standard capacity tanks and Brooks piston prover) BEV completed Comparison
F 419 1997-09-01 Intercomparison of Calibrations of a G250 Rotary Gas Meter FORCE completed Comparison
F 407 1997-03-01 Intercomparison of calibrations of two G 400 turbine meters assembled in series completed Comparison
F 474 1998-09-01 Intercomparison of high pressure gas flow measurement facilities using turbine and Venturi meters NEL completed Comparison
F 806 Intercomparison of low pressure gas flow facilities using a Molbloc transfer package NEL completed Comparison EUROMET.M.FF-S3
F 573 2000-01-01 Intercomparison of small water flow facilities NEL completed Comparison
F 470 1998-06-01 Intercomparison of the C* calculation NEL completed Comparison
F 669 2002-07-01 Intercomparison of two electromagnetic meters DN 25 BEV completed Comparison
F 1225 2013-01-31 Intercomparison of very low air speed standard facilities (0.05-1m/s) BEV/E+E completed Comparison EURAMET.M.FF-S9
F 1233 2012-08-01 Intercomparison of water flow meter reference standard UME completed Comparison
F 1162 2010-10-20 Intercomparison of Water Meter Reference Standard UME concluded Comparison
F 1161 2010-09-06 Intercomparison on water/heat meter calibration at 50 °C, 6 - 25 L/h LNE-CETIAT completed Comparison
F 877 2006-01-01 Intercomparison on Water/Heat meters at 50 °C, 6-25 l/h RISE completed Comparison
F, IM 1133 2009-06-22 Knowledge transfer in the field of liquid flow and volume metrology EIM completed Consultation
F 827 2005-09-01 LDA-based intercomparison of anemometers PTB completed Comparison EUROMET.M.FF-S5
F 491 1998-12-01 Measurement standards for the density for liquids at elevated pressure NEL completed Comparison
127 result(s)