Subject Reg. No. Starting TITLE Coordinating Institute Status Collaboration Type KCDB
F 1590 2024-01-02 Supplementary comparison: Intercomparison of calibration of a rotary piston gas meter G650 CMI agreed Comparison
EM, TF 1589 2023-05-01 Pilot Study: Comparison of Phase Noise Measurements LNE-LTFB in progress Comparison
F 1588 2022-04-01 Explaining the process of revision of volume standards ISO 8655 and ISO 4787 IPQ in progress Consultation
F 1587 2023-05-09 Bilateral supplementary comparison of volume using a 100 mL pycnometer VSL in progress Comparison
T 1586 2023-05-15 Hybrid Comparison - Air temperature sensors INRIM in progress Comparison
M 1585 2022-11-01 Bilateral supplementary comparison in high gauge pressure up to 1 GPa CMI in progress Comparison
L 1584 2022-11-11 Revision of EURAMET Calibration Guide No.10 Pitch Diameter of Parallel Thread Gauges by Mechanical Probing METAS in progress Consultation
T 1583 2023-04-24 Bilateral comparison in the freezing point of zinc between BEV and SMU SMU in progress Comparison
Q 1582 2023-06-01 On-site peer review of GEOSTM INRIM agreed Consultation
L 1581 2023-03-08 Supplementary comparison on gauge block calibration by mechanical comparison Metrosert in progress Comparison EURAMET.L-S2.2.n01
M 1580 2023-02-27 EURAMET key comparison in gas media from 0.3 mPa to 1 Pa (absolute mode) INRIM in progress Comparison EURAMET.M.P-K15.2
Q 1579 2023-03-01 On-site peer review of STUK STUK in progress Consultation
PR 1578 2023-07-01 Supplementary comparison in “Fiber Wavemeters” ISCIII agreed Comparison
Q 1577 2022-10-01 Peer review of the Quality Management System of LNE-SYRTE LNE-SYRTE in progress Consultation
T 1576 2023-02-01 Air Temperature Calibration System (ATCS) BEV in progress Research
L 1575 2022-10-14 Revision of EURAMET Calibration Guide No.2 on Calibration of Gauge Block Comparators NPL in progress Consultation
Q 1574 2022-12-01 On-site visits by peers - Remote peer reviews of VINS VINS in progress Consultation
L 1573 2022-11-18 Revision of EURAMET Calibration Guide No. 6 Cylindrical Diameter Standards CEM in progress Consultation
L 1572 2022-10-13 EURAMET Technical Guide on GNSS distance metrology PTB in progress Research
F 1571 2022-12-01 Supplementary bilateral comparison for small gas flow rates (2 to 1000) SCCM at STP with Laminar Flow Elements METAS in progress Comparison EURAMET.M.FF-S18
1190 result(s)