Intercomparison of Bell Provers using a transfer meter

Project Description

A positive displacement meter will be used to compare Bell Provers over the flow range 0.4 - 1.6 l/s. The Bell Prover will be calibrated at 4 flowrates; 0.4, 0.8, 1.2 and 1.6 l/s.

The laboratories should carry out the calibration using their normal procedures. If laboratories are not able to cover all the flowrates they may calibrate the meter over part of the flow range.

The intercomparison will provide details of international facility agreement.


Final Report 2000-03-01

The comparison has been finished and the report can be downloaded here>>.

Subjects
Flow (F)
Coordinator
C. Probert, NEL (United Kingdom)
Coordinating Institute
NEL (United Kingdom)
Further Partners
COM-DT
FI
IM
MAG-SM