The gateway to Europe's
integrated metrology community.

The list shows all projects coordinated within the Technical Committee for Mass and Related Quantities.

Projects TC-M

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
M 676 2002-08-26 Investigations on the force controlled piston gauge FPG8601 with non-rotating piston of nominal area 980 mm2 manufactured by DH Instruments Inc PTB completed Research
M 598 2000-02-01 Investigation of magnetic interactions between mass standards and weighing instruments PTB completed Research
M 650 2002-01-01 Interlaboratory comparison in the pressure range 0 to 13 000 Pa (differential mode), and 0,1 to 13 000 Pa (absolute mode) MIKES completed Research
M 339 1996-01-01 Intercomparison of volume standards by hydrostatic weighing METAS completed Comparison EUROMET.M.D-K1
M 303 1994-11-01 Intercomparison of viscosity standards in the low viscosity range PTB completed Comparison EUROMET.M.V-S2
M 415 1997-01-01 Intercomparison of viscosity standards in the high-viscosity range and test of surface-tension correction factors PTB completed Comparison
M 273 1993-04-01 Intercomparison of viscosity standards PTB completed Comparison EUROMET.M.V-S1
M 215 1992-06-01 Intercomparison of stainless steel kilogram standards NPL completed Comparison EUROMET.M.M-K1
M 509 1999-08-01 Intercomparison of Pt-Ir kilograms standards NPL completed Research
M 236 1991-01-01 Intercomparison of hydrometers' calibration stations with transfer standard hydrometers INRIM completed Comparison EUROMET.M.D-K4.PREV
M 45 1992-10-31 Intercomparison in the pressure range 50-500 MPa. LNE completed Comparison EUROMET.M.P-K5
M 455 1998-01-01 Intercomparison in the pressure range 50 - 350 kPa MIKES completed Comparison
M 110 1992-02-18 Intercomparison in the pressure range 100 - 700 (1000) MPa LNE completed Comparison EUROMET.M.P-K6
M 212 Intercomparison about weighing 5 metric tonnes LNE completed Comparison
M 1055 2008-04-21 Inter-comparison of reference-type static torque machines PTB completed Comparison EURAMET.M.T-S1
M 319 1995-02-01 Implementation of procedures for the expression of uncertainty in mass calibration DFM concluded Consultation
M 858 2005-01-01 Hydrostatic weighing – exchange of experiences IPQ completed Research
M 1607 2024-01-10 Hybrid bilateral comparison in viscosity determination PTB in progress Comparison
M 26 1989-12-01 Hardness standards INRIM completed Traceabillity
M 1596 2023-10-04 Guidelines for the uncertainty determination and calibration of torque measurements PTB in progress Consultation
M 1620 2024-04-22 Guidelines for the traceability and uncertainty evaluation in absolute gravity measurements INRIM in progress Consultation
M 887 2006-04-01 Guidance on uncertainty calculations for force calibrations NPL completed Research
M 803 2004-08-20 FPG-type digital piston manometer – exchange of experiences MIKES completed Research
M 1597 2023-10-16 Force subsequent key comparison (50 kN and 100 kN) INRIM in progress Comparison EURAMET.M.F-K2.a
M 1536 2021-09-21 Finalisation of the draft Calibration Guideline on the Calibration of Automatic Catchweighing Instruments MIRS completed Consultation
M 1662 2024-05-01 Finalisation of the draft "Guideline on the Calibration of Automatic Gravimetric Filling Instruments" MIRS in progress Consultation
M 1039 2008-03-01 FEA calculation of pressure distortion coefficients of gas-operated pressure balances PTB completed Research
M 1125 2009-10-01 Evaluation of cross-float measurements with pressure balances LNE completed Research
M 442 1997-10-01 EUROMET key comparison in the low pressure range 1 x 10^-7 Pa to 1000 Pa LNE completed Comparison EUROMET.M.P-K1.a
M 535 2002-01-01 EUROMET Force Comparison, 5kN and 10 kN MIKES completed Comparison EUROMET.M.F-K1
M 1555 2022-06-10 EURAMET supplementary comparison of mass standards 20 kg BEV in progress Comparison EURAMET.M.M-S11
M 1580 2023-02-27 EURAMET key comparison in gas media from 0.3 mPa to 1 Pa (absolute mode) INRIM in progress Comparison EURAMET.M.P-K15.2
M 328 1994-07-22 Enquiry on the cleaning of stainless steel mass standards INRIM completed Research
M 740 2004-01-01 Effective area calculation, uncertainty evaluation and studies for piston-cylinder units of non-ideal geometries used in pressure balances (extended pressure range) INRIM completed Research
M 111 1992-02-18 Dynamic pressure measurement in liquid and gas LNE-ENSAM completed Research
M 1411 2016-09-01 Dynamic high pressure comparison MIKES concluded Comparison
M 1110 2009-06-01 Determination of magnetic properties of mass standards PTB completed Research
M 1262 2012-12-01 Determination of Forces (tension and compression) from 5 N up to 250 kN with two new Dead Weight Machines developed and realised by BEV BEV in progress Comparison EURAMET.M.F-S2
M 1214 2011-10-01 Density measurement of viscous oils VSL completed Research
M 1240 2012-10-20 Density determinations of liquid samples by density meters BEV completed Comparison EURAMET.M.D-S1
M 519 1999-05-01 Correlations between air humidity and anormal dispersion of refractive index of air LNE-LCM/CNAM completed Research
M 395 1996-12-01 Convection effects in mass calibration due to temperature differences or gradients. PTB completed Research
M 1054 2008-06-18 Comparison, mass standards - 100g, 10g, 500µg, 200µg & 100µg NPL completed Comparison EURAMET.M.M-S2
M 1428 2018-09-01 Comparison of torque standards from 100 N⋅m to 5000 N⋅m LNE in progress Comparison EURAMET.M.T-S5
M 1304 2014-09-15 Comparison of torque standards from 0,1 N⋅m at 50 N⋅m LNE in progress Comparison EURAMET.M.T-S4
M 931 2007-04-01 Comparison of the pressure distortion coefficients of the LNE and PTB 1 GPa piston-cylinder assemblies PTB completed Comparison EURAMET.M.P-S5
M 702 2003-07-01 Comparison of the calibrations of high resolution hydrometers for liquid density determinations INRIM completed Comparison EUROMET.M.D-K4
M 1350 2015-01-20 Comparison of sub-multiples of the kilogram MIRS completed Comparison EURAMET.M.M-S10
M 861 2005-08-10 Comparison of standards in the pressure range 0,04 to 1,75 MPa UME completed Comparison EUROMET.M.P-S4
M 1444 2018-05-23 Comparison of Rockwell hardness scales INRIM completed Comparison EURAMET.M.H-S1.a.b.c
180 result(s)