The gateway to Europe's
integrated metrology community.

The list shows all projects coordinated within the Technical Committee for Mass and Related Quantities.

Projects TC-M

Subject Reg. No. Starting TITLE Coordinating Institute Status Collaboration Type KCDB
M 1662 2024-05-01 Finalisation of the draft "Guideline on the Calibration of Automatic Gravimetric Filling Instruments" MIRS in progress Consultation
M 1620 2024-04-22 Guidelines for the traceability and uncertainty evaluation in absolute gravity measurements INRIM in progress Consultation
M 1607 2024-01-10 Hybrid bilateral comparison in viscosity determination PTB in progress Comparison
M 1603 2024-05-01 Key comparison of absolute gravimeters VÚGTK in progress Comparison EURAMET.M.G-K2.2023
M 1601 2024-01-15 Pilot study: Comparison of dynamic pressure measurements PTB in progress Comparison
M 1597 2023-10-16 Force subsequent key comparison (50 kN and 100 kN) INRIM in progress Comparison EURAMET.M.F-K2.a
M 1596 2023-10-04 Guidelines for the uncertainty determination and calibration of torque measurements PTB in progress Consultation
M 1585 2022-11-01 Bilateral supplementary comparison in high gauge pressure up to 1 GPa CMI in progress Comparison
M 1580 2023-02-27 EURAMET key comparison in gas media from 0.3 mPa to 1 Pa (absolute mode) INRIM in progress Comparison EURAMET.M.P-K15.2
M 1570 2022-12-01 Revision of EURAMET Calibration Guides No. 3 (Calibration of Pressure Balances) and No. 17 (Guidelines on the Calibration of Electromechanical and Mechanical Manometers) PTB in progress Consultation
M 1566 2022-08-24 Bilateral key comparison in gas media (gauge mode) in the range 15 kPa to 175 kPa RISE in progress Comparison EURAMET.M.P-K8.2023
M 1556 2022-05-22 Pilot study: Comparison for the realisation of the mass scale IMBiH in progress Comparison
M 1555 2022-06-10 EURAMET supplementary comparison of mass standards 20 kg BEV in progress Comparison EURAMET.M.M-S11
M 1550 2022-03-21 Bilateral supplementary comparison in gas media (gauge mode) in the range from 0.1 MPa to 3.5 MPa MIRS/IMT/LMT in progress Comparison EURAMET.M.P-S20
M 1549 2022-03-21 Bilateral supplementary comparison in gas media (absolute mode) in the range from 10 kPa to 200 kPa MIRS/IMT/LMT in progress Comparison EURAMET.M.P-S1
M 1536 2021-09-21 Finalisation of the draft Calibration Guideline on the Calibration of Automatic Catchweighing Instruments MIRS completed Consultation
M 1532 2020-11-02 Key comparison of stainless steel multiples and sub-multiples of the kilogram UME in progress Comparison EURAMET.M.M-K7
M 1529 2021-04-01 Supplementary comparison of torque standards from 10 N.m to 500 N.m LNE in progress Comparison EURAMET.M.T-S6
M 1523 2021-02-01 Key comparison on density determination of liquids using oscillation type density meters BEV completed Comparison EURAMET.M.D-K2.2
M 1522 2021-02-01 Key comparison on density determination of liquids by hydrostatic weighing BEV completed Comparison EURAMET.M.D-K2.1
M 1496 2020-03-02 Calibration of high resolution hydrometers INRIM completed Comparison EURAMET.M.D-K4.2020
M 1494 2019-09-01 Key comparison of National Pressure Standards in the Range 1 Pa to 15 kPa of Absolute and Gauge Pressure PTB in progress Comparison EURAMET.M.P-K4.2020
M 1472 2019-05-01 Supplementary comparison of force standards from 10 kN to 500 kN NPL completed Comparison EURAMET.M.F-S5
M 1445 2018-10-01 Key comparison of Vickers hardness scales INRIM completed Comparison EURAMET.M.H-K1.c
M 1444 2018-05-23 Comparison of Rockwell hardness scales INRIM completed Comparison EURAMET.M.H-S1.a.b.c
M 1443 2018-10-01 Comparison of Brinell hardness scales INRIM completed Comparison EURAMET.M.H-S2.a.b
M 1441 2017-06-01 Calibration guides for force and torque traceability NPL completed Consultation
M 1440 2018-04-01 KC Density of liquids BEV in progress Comparison EURAMET.M.D-K5
M 1432 2018-04-16 Comparison of Absolute Gravimeters, Wettzell, Germany 2018 VÚGTK completed Comparison EURAMET.M.G-K3
M 1428 2018-09-01 Comparison of torque standards from 100 N⋅m to 5000 N⋅m LNE in progress Comparison EURAMET.M.T-S5
M 1416 2017-03-15 Bilateral study comparison in the high vacuum range from 5E-7 Pa to 9E-4 Pa. CMI in progress Comparison
M 1414 2015-09-15 Comparison of hydraulic pressure balance effective area determination in the range up to 80 MPa FSB-LPM completed Comparison EURAMET.M.P-S18
M 1411 2016-09-01 Dynamic high pressure comparison MIKES concluded Comparison
M 1406 2011-12-01 Comparison of mass standards 100 mg, 10 g, 100 g, 1 kg, 10 kg and 50 kg UME completed Comparison EURAMET.M.M-S3
M 1405 2016-12-01 Comparison of absolute pressure in the range 0.1 mPa to 1 Pa PTB completed Comparison EURAMET.M.P-K15.1
M 1404 2016-07-01 Solid density comparison CEM completed Comparison EURAMET.M.D-S3
M 1385 2016-01-02 Comparison in the negative gauge pressure range from -920 to 0 hPa. Part II LNE concluded Comparison EURAMET.M.P-S17
M 1376 2015-09-01 Bilateral comparison in low gauge pressure 100 Pa to 3,5 kPa GUM concluded Comparison
M 1375 2015-09-01 Bilateral comparison in high gauge pressure 250 MPa GUM in progress Comparison EURAMET.M.P-S16
M 1368 2015-11-02 Comparison of Absolute Gravimeters, Walferdange 2015 VÚGTK completed Comparison EURAMET.M.G-K2
M 1356 2015-03-01 Bilateral comparison: density of mass standards (stainless steel 10 g, 20 g, 200 g, 1 kg) BEV completed Comparison EURAMET.M.D-S2
M 1350 2015-01-20 Comparison of sub-multiples of the kilogram MIRS completed Comparison EURAMET.M.M-S10
M 1346 2014-04-11 Key comparison of 1 kg mass standards linked to CCM.M-K4 BEV completed Comparison EURAMET.M.M-K4.2015
M 1345 2014-05-01 Bilateral comparison of mass standards (100 mg, 2 g, 20 g, 500 g) BEV completed Comparison EURAMET.M.M-K2.6
M 1330 2014-08-01 Bilateral comparison of pressure standards, gas media and gauge mode from 0,7 MPa to 7 MPa LNE completed Comparison
M 1315 2014-09-01 Bilateral Mass comparison at 50 kg LNE completed Comparison
M 1311 2014-05-12 Bilateral force comparison in compression at 10 kN and 20 kN LNE completed Comparison EURAMET.M.F-S4
M 1310 2014-02-17 Sub - milligram mass comparison NPL completed Comparison EURAMET.M.M-S9
M 1306 2013-05-01 Supplementary comparison of hydraulic gauge pressure standards from 50 MPa to 1000 MPa PTB completed Comparison EURAMET.M.P-S14
M 1304 2014-09-15 Comparison of torque standards from 0,1 N⋅m at 50 N⋅m LNE in progress Comparison EURAMET.M.T-S4
180 result(s)