The gateway to Europe's
integrated metrology community.

The list shows all projects coordinated within the Technical Committee for Mass and Related Quantities.

Projects TC-M

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
M 535 2002-01-01 EUROMET Force Comparison, 5kN and 10 kN MIKES completed Comparison EUROMET.M.F-K1
M 442 1997-10-01 EUROMET key comparison in the low pressure range 1 x 10^-7 Pa to 1000 Pa LNE completed Comparison EUROMET.M.P-K1.a
M 1125 2009-10-01 Evaluation of cross-float measurements with pressure balances LNE completed Research
M 1039 2008-03-01 FEA calculation of pressure distortion coefficients of gas-operated pressure balances PTB completed Research
M 1662 2024-05-01 Finalisation of the draft "Guideline on the Calibration of Automatic Gravimetric Filling Instruments" MIRS in progress Consultation
M 1536 2021-09-21 Finalisation of the draft Calibration Guideline on the Calibration of Automatic Catchweighing Instruments MIRS completed Consultation
M 1597 2023-10-16 Force subsequent key comparison (50 kN and 100 kN) INRIM in progress Comparison EURAMET.M.F-K2.a
M 803 2004-08-20 FPG-type digital piston manometer – exchange of experiences MIKES completed Research
M 887 2006-04-01 Guidance on uncertainty calculations for force calibrations NPL completed Research
M 1620 2024-04-22 Guidelines for the traceability and uncertainty evaluation in absolute gravity measurements INRIM in progress Consultation
M 1596 2023-10-04 Guidelines for the uncertainty determination and calibration of torque measurements PTB in progress Consultation
M 26 1989-12-01 Hardness standards INRIM completed Traceabillity
M 1607 2024-01-10 Hybrid bilateral comparison in viscosity determination PTB in progress Comparison
M 858 2005-01-01 Hydrostatic weighing – exchange of experiences IPQ completed Research
M 319 1995-02-01 Implementation of procedures for the expression of uncertainty in mass calibration DFM concluded Consultation
M 1055 2008-04-21 Inter-comparison of reference-type static torque machines PTB completed Comparison EURAMET.M.T-S1
M 212 Intercomparison about weighing 5 metric tonnes LNE completed Comparison
M 110 1992-02-18 Intercomparison in the pressure range 100 - 700 (1000) MPa LNE completed Comparison EUROMET.M.P-K6
M 455 1998-01-01 Intercomparison in the pressure range 50 - 350 kPa MIKES completed Comparison
M 45 1992-10-31 Intercomparison in the pressure range 50-500 MPa. LNE completed Comparison EUROMET.M.P-K5
M 236 1991-01-01 Intercomparison of hydrometers' calibration stations with transfer standard hydrometers INRIM completed Comparison EUROMET.M.D-K4.PREV
M 509 1999-08-01 Intercomparison of Pt-Ir kilograms standards NPL completed Research
M 215 1992-06-01 Intercomparison of stainless steel kilogram standards NPL completed Comparison EUROMET.M.M-K1
M 273 1993-04-01 Intercomparison of viscosity standards PTB completed Comparison EUROMET.M.V-S1
M 415 1997-01-01 Intercomparison of viscosity standards in the high-viscosity range and test of surface-tension correction factors PTB completed Comparison
M 303 1994-11-01 Intercomparison of viscosity standards in the low viscosity range PTB completed Comparison EUROMET.M.V-S2
M 339 1996-01-01 Intercomparison of volume standards by hydrostatic weighing METAS completed Comparison EUROMET.M.D-K1
M 650 2002-01-01 Interlaboratory comparison in the pressure range 0 to 13 000 Pa (differential mode), and 0,1 to 13 000 Pa (absolute mode) MIKES completed Research
M 598 2000-02-01 Investigation of magnetic interactions between mass standards and weighing instruments PTB completed Research
M 676 2002-08-26 Investigations on the force controlled piston gauge FPG8601 with non-rotating piston of nominal area 980 mm2 manufactured by DH Instruments Inc PTB completed Research
M 1440 2018-04-01 KC Density of liquids BEV in progress Comparison EURAMET.M.D-K5
M 1346 2014-04-11 Key comparison of 1 kg mass standards linked to CCM.M-K4 BEV completed Comparison EURAMET.M.M-K4.2015
M 1603 2024-05-01 Key comparison of absolute gravimeters VÚGTK in progress Comparison EURAMET.M.G-K2.2023
M 1494 2019-09-01 Key comparison of National Pressure Standards in the Range 1 Pa to 15 kPa of Absolute and Gauge Pressure PTB in progress Comparison EURAMET.M.P-K4.2020
M 1532 2020-11-02 Key comparison of stainless steel multiples and sub-multiples of the kilogram UME in progress Comparison EURAMET.M.M-K7
M 1445 2018-10-01 Key comparison of Vickers hardness scales INRIM completed Comparison EURAMET.M.H-K1.c
M 1522 2021-02-01 Key comparison on density determination of liquids by hydrostatic weighing BEV completed Comparison EURAMET.M.D-K2.1
M 1523 2021-02-01 Key comparison on density determination of liquids using oscillation type density meters BEV completed Comparison EURAMET.M.D-K2.2
M 1119 2009-06-16 Knowledge transfer in the field of calibration of non-automatic weighing instruments MIRS completed Consultation
M 402 1997-03-01 Mass mesurement (Guide to the mass determination) SMU concluded Research
M 317 1994-06-01 Mathematical models for linearizing the scales of balances INRIM completed Research
M 144 1990-01-01 Measurement of air density using specially designed masses PTB completed Research
M 113 1990-12-18 Multi-component force calibration systems and development of multi-component force transducer INRIM completed Research
M 1556 2022-05-22 Pilot study: Comparison for the realisation of the mass scale IMBiH in progress Comparison
M 1601 2024-01-15 Pilot study: Comparison of dynamic pressure measurements PTB in progress Comparison
M 592 2000-03-01 PRAQIII Intercomparison of mass measurements DFM completed Comparison
M 788 2004-03-20 Pressure Measurements and Calculation of the Effective Area of a Transfer Piston-Cylinder Assembly from 0.05 to 1 MPa METAS completed Comparison EUROMET.M.P-S1
M 1179 2011-03-09 Pressure standard comparison, gas media and gauge mode, from 0,7 MPa to 7 MPa FORCE completed Comparison EURAMET.M.P-K1.c
M 336 1995-01-01 Primary mass standards based on atomic mass PTB completed Research
M 1215 2012-01-15 Primary mercury columns using floats - exchange of experiences CEM concluded Research
180 result(s)