The gateway to Europe's
integrated metrology community.

The list shows all projects coordinated within the Technical Committee for Mass and Related Quantities.

Projects TC-M

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
M 1472 2019-05-01 Supplementary comparison of force standards from 10 kN to 500 kN NPL completed Comparison EURAMET.M.F-S5
M 1496 2020-03-02 Calibration of high resolution hydrometers INRIM completed Comparison EURAMET.M.D-K4.2020
M 1522 2021-02-01 Key comparison on density determination of liquids by hydrostatic weighing BEV completed Comparison EURAMET.M.D-K2.1
M 1523 2021-02-01 Key comparison on density determination of liquids using oscillation type density meters BEV completed Comparison EURAMET.M.D-K2.2
M 1529 2021-04-01 Supplementary comparison of torque standards from 10 N.m to 500 N.m LNE in progress Comparison EURAMET.M.T-S6
M 1532 2020-11-02 Key comparison of stainless steel multiples and sub-multiples of the kilogram UME in progress Comparison EURAMET.M.M-K7
M 1549 2022-03-21 Bilateral supplementary comparison in gas media (absolute mode) in the range from 10 kPa to 200 kPa MIRS/IMT/LMT in progress Comparison EURAMET.M.P-S1
M 1550 2022-03-21 Bilateral supplementary comparison in gas media (gauge mode) in the range from 0.1 MPa to 3.5 MPa MIRS/IMT/LMT in progress Comparison EURAMET.M.P-S20
M 1555 2022-06-10 EURAMET supplementary comparison of mass standards 20 kg BEV in progress Comparison EURAMET.M.M-S11
M 1556 2022-05-22 Pilot study: Comparison for the realisation of the mass scale IMBiH in progress Comparison
M 1566 2022-08-24 Bilateral key comparison in gas media (gauge mode) in the range 15 kPa to 175 kPa RISE in progress Comparison EURAMET.M.P-K8.2023
M 1580 2023-02-27 EURAMET key comparison in gas media from 0.3 mPa to 1 Pa (absolute mode) INRIM in progress Comparison EURAMET.M.P-K15.2
M 1585 2022-11-01 Bilateral supplementary comparison in high gauge pressure up to 1 GPa CMI in progress Comparison
M 1597 2023-10-16 Force subsequent key comparison (50 kN and 100 kN) INRIM in progress Comparison EURAMET.M.F-K2.a
M 1601 2024-01-15 Pilot study: Comparison of dynamic pressure measurements PTB in progress Comparison
M 1603 2024-05-01 Key comparison of absolute gravimeters VÚGTK in progress Comparison EURAMET.M.G-K2.2023
M 1607 2024-01-10 Hybrid bilateral comparison in viscosity determination PTB in progress Comparison
M 1038 2006-08-16 Transferring knowledge on pressure balance calibration NSAI NML completed Consultation
M 220 1990-08-01 The harmonisation of methods of evaluating and quoting the measurement uncertainties of pressure balances NPL completed Consultation
M 259 1992-10-01 Characterization of technical and metrological balances INRIM completed Consultation
M 281 1992-12-01 Workshop on training activities LNE completed Consultation
M 291 1993-01-01 The harmonisation of the methods of calibrating and estimating the uncertainty of digital piston manometers LNE completed Consultation
M 310 1994-12-07 Workshop on statement of uncertainty of force standard machines LNE completed Consultation
M 319 1995-02-01 Implementation of procedures for the expression of uncertainty in mass calibration DFM concluded Consultation
M 675 2002-05-01 Validation of facilities for density determination VSL completed Consultation
M 697 2003-02-05 Setting up of a mass lab from 1mg to 10 kg at E1 level MCCAA-SMI completed Consultation
IM, M 1096 2008-04-01 SEE exercise comparison of mass standards of 1 kg and submultiples of the kilogram EIM completed Consultation
M 1205 2011-12-01 Review of EURAMET Calibration Guideline No. 18: Guidelines on the Calibration of Non-Automatic Weighing Instruments CEM completed Consultation
M 1119 2009-06-16 Knowledge transfer in the field of calibration of non-automatic weighing instruments MIRS completed Consultation
M 1441 2017-06-01 Calibration guides for force and torque traceability NPL completed Consultation
M 1536 2021-09-21 Finalisation of the draft Calibration Guideline on the Calibration of Automatic Catchweighing Instruments MIRS completed Consultation
M 1570 2022-12-01 Revision of EURAMET Calibration Guides No. 3 (Calibration of Pressure Balances) and No. 17 (Guidelines on the Calibration of Electromechanical and Mechanical Manometers) PTB in progress Consultation
M 1596 2023-10-04 Guidelines for the uncertainty determination and calibration of torque measurements PTB in progress Consultation
M 1620 2024-04-22 Guidelines for the traceability and uncertainty evaluation in absolute gravity measurements INRIM in progress Consultation
M 1662 2024-05-01 Finalisation of the draft "Guideline on the Calibration of Automatic Gravimetric Filling Instruments" MIRS in progress Consultation
M 1039 2008-03-01 FEA calculation of pressure distortion coefficients of gas-operated pressure balances PTB completed Research
M 64 1990-05-01 Automatic weighing RISE completed Research
M 111 1992-02-18 Dynamic pressure measurement in liquid and gas LNE-ENSAM completed Research
M 113 1990-12-18 Multi-component force calibration systems and development of multi-component force transducer INRIM completed Research
M 144 1990-01-01 Measurement of air density using specially designed masses PTB completed Research
M 186 1990-11-01 Weight stability INRIM completed Research
M 213 1992-04-06 Training periods in the pressure laboratory at L.N.E. LNE completed Research
M 231 1990-11-19 The assessment of uncertainty in mass calibration at national laboratory level INRIM completed Research
M 256 1993-10-01 Calculation of the elastic distortion of piston cylinder assemblies in pressure balances etc. INRIM completed Research
M 317 1994-06-01 Mathematical models for linearizing the scales of balances INRIM completed Research
M 318 1994-06-01 Study of balance for ground vibrations INRIM completed Research
M 328 1994-07-22 Enquiry on the cleaning of stainless steel mass standards INRIM completed Research
M 336 1995-01-01 Primary mass standards based on atomic mass PTB completed Research
M 351 1995-02-02 Workshop on 'Secondary and Reference Mass Standard' LNE completed Research
M 395 1996-12-01 Convection effects in mass calibration due to temperature differences or gradients. PTB completed Research
180 result(s)