The list shows all projects coordinated within the Technical Committee for Mass and Related Quantities.

Projects TC-M

Subject Reg. No. Starting TITLE Coordinating Institute Status Collaboration Type KCDB
M 442 1997-10-01 EUROMET key comparison in the low pressure range 1 x 10^-7 Pa to 1000 Pa LNE completed Comparison EUROMET.M.P-K1.a
M 445 2006-05-23 Comparison of Mass Standards in Multiples and Submultiples of the Kilogramm RISE completed Comparison EUROMET.M.M-K2
M 455 1998-01-01 Intercomparison in the pressure range 50 - 350 kPa MIKES completed Comparison
M 461 1998-09-01 Comparison of 500 kg mass standard CMI completed Comparison EUROMET.M.M-S1
M 463 1998-03-01 Calculation of elastic distortion and associated uncertainty in piston cylinders operating up to 1 Gpa PTB completed Research
M 499 1998-03-01 Bulletin-board of concerns, problems and experiences in Pressure Metrology VSL completed Research
M 505 2000-01-01 Comparison of force standards from 500 kN to 4 MN PTB in progress Comparison EURAMET.M.F-K3
M 509 1999-08-01 Intercomparison of Pt-Ir kilograms standards NPL completed Research
M 510 1999-08-01 Comparison of mass standards of the kilogram (stainless steel) NPL completed Comparison EUROMET.M.M-K4
M 518 2003-01-01 An intercomparison of force standards at 50 kN and 100 kN NPL completed Comparison EUROMET.M.F-K2
M 519 1999-05-01 Correlations between air humidity and anormal dispersion of refractive index of air LNE-LCM/CNAM completed Research
M 535 2002-01-01 EUROMET Force Comparison, 5kN and 10 kN MIKES completed Comparison EUROMET.M.F-K1
M 537 1999-06-01 Bilateral comparison linking to CCM key comparison in the pressure range up to 7 MPa CMI completed Comparison
M 551 1999-10-26 Study of several roughness measurement techniques for the characterisation of mass standard LNE-LCM/CNAM completed Research
M 592 2000-03-01 PRAQIII Intercomparison of mass measurements DFM completed Comparison
M 598 2000-02-01 Investigation of magnetic interactions between mass standards and weighing instruments PTB completed Research
M 604 2000-11-01 Comparison Issues NPL completed Research
M 627 2001-09-01 Comparison of density determinations of liquid samples PTB completed Comparison EUROMET.M.D-K2
M 650 2002-01-01 Interlaboratory comparison in the pressure range 0 to 13 000 Pa (differential mode), and 0,1 to 13 000 Pa (absolute mode) MIKES completed Research
M 675 2002-05-01 Validation of facilities for density determination VSL completed Consultation
M 676 2002-08-26 Investigations on the force controlled piston gauge FPG8601 with non-rotating piston of nominal area 980 mm2 manufactured by DH Instruments Inc PTB completed Research
M 1411 2016-09-01 Dynamic high pressure comparison MIKES concluded Comparison
M 697 2003-02-05 Setting up of a mass lab from 1mg to 10 kg at E1 level MCCAA-SMI completed Consultation
M 702 2003-07-01 Comparison of the calibrations of high resolution hydrometers for liquid density determinations INRIM completed Comparison EUROMET.M.D-K4
M 722 2003-10-01 Bilateral pressure comparison in the range to 7 MPa, in oil INM-RO completed Comparison
M 734 2003-04-01 Study of materials for the realisation of mass standards LNE completed Research
M 740 2004-01-01 Effective area calculation, uncertainty evaluation and studies for piston-cylinder units of non-ideal geometries used in pressure balances (extended pressure range) INRIM completed Research
M 742 2003-08-15 A bilateral comparison of a 1 kg platinum standard DFM completed Research
M 761 2003-03-01 A bilateral comparison of a 1 mg - 20 kg weight set calibrated by subdivision/multiplication DFM completed Comparison
M 786 2004-12-01 Comparison of Mass Standards in Multiples and Submultiples of the Kilogram II RISE completed Comparison EUROMET.M.M-K2.1
M 788 2004-03-20 Pressure Measurements and Calculation of the Effective Area of a Transfer Piston-Cylinder Assembly from 0.05 to 1 MPa METAS completed Comparison EUROMET.M.P-S1
M 803 2004-08-20 FPG-type digital piston manometer – exchange of experiences MIKES completed Research
M 832 2004-12-01 Comparison of 50 kg weights MIKES completed Comparison
M 834 2005-06-15 Bilateral comparison in the field of pressure measurement UME completed Comparison
M 838 2005-06-20 Bilateral comparison of Force Standard Machines UME completed Comparison
M 855 2005-07-06 Comparison between NPL and INRIM in the range 3.10-4 Pa to 9.10-2 Pa NPL completed Comparison
M 858 2005-01-01 Hydrostatic weighing – exchange of experiences IPQ completed Research
M 861 2005-08-10 Comparison of standards in the pressure range 0,04 to 1,75 MPa UME completed Comparison EUROMET.M.P-S4
M 881 2005-07-01 Comparison in the range 50 MPa to 500 MPa MIKES completed Comparison EURAMET.M.P-K7
M 884 2006-01-01 Comparison of absolute pressure standards in the barometric range from 80 kPa to 110 kPa LNE completed Comparison
M 887 2006-04-01 Guidance on uncertainty calculations for force calibrations NPL completed Research
M 911 2006-07-01 Study of standard leaks performance for different gas, in the transition regime INRIM completed Research
M 921 2006-08-15 Comparison in the range -2000 Pa to +2000 Pa MIKES completed Comparison
M 922 2006-04-01 Bilateral comparison to support planned replacement of CMC entries of PTB in the range 1E-2 Pa to 2E3 Pa PTB completed Comparison EUROMET.M.P-S2
M 931 2007-04-01 Comparison of the pressure distortion coefficients of the LNE and PTB 1 GPa piston-cylinder assemblies PTB completed Comparison EURAMET.M.P-S5
M 1054 2008-06-18 Comparison, mass standards - 100g, 10g, 500µg, 200µg & 100µg NPL completed Comparison EURAMET.M.M-S2
M 1055 2008-04-21 Inter-comparison of reference-type static torque machines PTB completed Comparison EURAMET.M.T-S1
M 1070 2008-07-01 Bilateral and supplementary comparison with two SRG as transfer standard between SP and PTB RISE concluded Comparison
M 1091 2009-03-01 Comparison in the range (50 to 500) MPa of liquid pressure UME completed Comparison EURAMET.M.P-K13
M 1093 2008-05-19 Comparison of absolute gravimeters METAS completed Comparison EURAMET.M.G-S1
180 result(s)