The gateway to Europe's
integrated metrology community.

The list shows all projects coordinated within the Technical Committee for Mass and Related Quantities.

Projects TC-M

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
M 1444 2018-05-23 Comparison of Rockwell hardness scales INRIM completed Comparison EURAMET.M.H-S1.a.b.c
M 1445 2018-10-01 Key comparison of Vickers hardness scales INRIM completed Comparison EURAMET.M.H-K1.c
M 1496 2020-03-02 Calibration of high resolution hydrometers INRIM completed Comparison EURAMET.M.D-K4.2020
M 1580 2023-02-27 EURAMET key comparison in gas media from 0.3 mPa to 1 Pa (absolute mode) INRIM in progress Comparison EURAMET.M.P-K15.2
M 1597 2023-10-16 Force subsequent key comparison (50 kN and 100 kN) INRIM in progress Comparison EURAMET.M.F-K2.a
M 1620 2024-04-22 Guidelines for the traceability and uncertainty evaluation in absolute gravity measurements INRIM in progress Consultation
M 858 2005-01-01 Hydrostatic weighing – exchange of experiences IPQ completed Research
M 152 1990-10-29 Calibration of pressure standards Ruska 2450-700 JV completed Traceabillity
M 734 2003-04-01 Study of materials for the realisation of mass standards LNE completed Research
M 45 1992-10-31 Intercomparison in the pressure range 50-500 MPa. LNE completed Comparison EUROMET.M.P-K5
M 110 1992-02-18 Intercomparison in the pressure range 100 - 700 (1000) MPa LNE completed Comparison EUROMET.M.P-K6
M 212 Intercomparison about weighing 5 metric tonnes LNE completed Comparison
M 213 1992-04-06 Training periods in the pressure laboratory at L.N.E. LNE completed Research
M 214 Viscosity measurement services LNE completed Traceabillity
M 281 1992-12-01 Workshop on training activities LNE completed Consultation
M 291 1993-01-01 The harmonisation of the methods of calibrating and estimating the uncertainty of digital piston manometers LNE completed Consultation
M 310 1994-12-07 Workshop on statement of uncertainty of force standard machines LNE completed Consultation
M 351 1995-02-02 Workshop on 'Secondary and Reference Mass Standard' LNE completed Research
M 442 1997-10-01 EUROMET key comparison in the low pressure range 1 x 10^-7 Pa to 1000 Pa LNE completed Comparison EUROMET.M.P-K1.a
M 884 2006-01-01 Comparison of absolute pressure standards in the barometric range from 80 kPa to 110 kPa LNE completed Comparison
M 1385 2016-01-02 Comparison in the negative gauge pressure range from -920 to 0 hPa. Part II LNE concluded Comparison EURAMET.M.P-S17
M 1115 2010-08-01 R-134a leak comparison in atmospheric pressure LNE completed Comparison
M 1125 2009-10-01 Evaluation of cross-float measurements with pressure balances LNE completed Research
M 1304 2014-09-15 Comparison of torque standards from 0,1 N⋅m at 50 N⋅m LNE in progress Comparison EURAMET.M.T-S4
M 1315 2014-09-01 Bilateral Mass comparison at 50 kg LNE completed Comparison
M 1311 2014-05-12 Bilateral force comparison in compression at 10 kN and 20 kN LNE completed Comparison EURAMET.M.F-S4
M 1330 2014-08-01 Bilateral comparison of pressure standards, gas media and gauge mode from 0,7 MPa to 7 MPa LNE completed Comparison
M 1428 2018-09-01 Comparison of torque standards from 100 N⋅m to 5000 N⋅m LNE in progress Comparison EURAMET.M.T-S5
M 1529 2021-04-01 Supplementary comparison of torque standards from 10 N.m to 500 N.m LNE in progress Comparison EURAMET.M.T-S6
M 111 1992-02-18 Dynamic pressure measurement in liquid and gas LNE-ENSAM completed Research
M 519 1999-05-01 Correlations between air humidity and anormal dispersion of refractive index of air LNE-LCM/CNAM completed Research
M 551 1999-10-26 Study of several roughness measurement techniques for the characterisation of mass standard LNE-LCM/CNAM completed Research
M 697 2003-02-05 Setting up of a mass lab from 1mg to 10 kg at E1 level MCCAA-SMI completed Consultation
M 1232 2012-05-07 Bilateral comparison of calibrations of mass standards MCCAA-SMI completed Comparison EURAMET.M.M-S4
M 1040 2007-07-01 Comparison in Gas Media (absolute mode) in the range from 100 µPa to 1 Pa METAS completed Comparison EURAMET.M.P-S7
M 1041 2007-07-01 Comparison in gas media (absolute and gauge mode) in the range from 25 kPa to 200 kPa METAS completed Comparison EURAMET.M.P-K8
M 339 1996-01-01 Intercomparison of volume standards by hydrostatic weighing METAS completed Comparison EUROMET.M.D-K1
M 788 2004-03-20 Pressure Measurements and Calculation of the Effective Area of a Transfer Piston-Cylinder Assembly from 0.05 to 1 MPa METAS completed Comparison EUROMET.M.P-S1
M 1093 2008-05-19 Comparison of absolute gravimeters METAS completed Comparison EURAMET.M.G-S1
M 1186 2011-11-01 Comparison of absolute gravimeters METAS completed Comparison EURAMET.M.G-K1
M 455 1998-01-01 Intercomparison in the pressure range 50 - 350 kPa MIKES completed Comparison
M 535 2002-01-01 EUROMET Force Comparison, 5kN and 10 kN MIKES completed Comparison EUROMET.M.F-K1
M 650 2002-01-01 Interlaboratory comparison in the pressure range 0 to 13 000 Pa (differential mode), and 0,1 to 13 000 Pa (absolute mode) MIKES completed Research
M 1411 2016-09-01 Dynamic high pressure comparison MIKES concluded Comparison
M 803 2004-08-20 FPG-type digital piston manometer – exchange of experiences MIKES completed Research
M 832 2004-12-01 Comparison of 50 kg weights MIKES completed Comparison
M 881 2005-07-01 Comparison in the range 50 MPa to 500 MPa MIKES completed Comparison EURAMET.M.P-K7
M 921 2006-08-15 Comparison in the range -2000 Pa to +2000 Pa MIKES completed Comparison
M 1206 2011-11-02 Bilateral comparison in the barometric absolute pressure range 800 to 1100 hPa MIKES completed Comparison
M 1207 2011-11-02 Bilateral comparison to determine the effective area of the piston cylinder unit by cross-floating MIKES completed Comparison
180 result(s)