The gateway to Europe's
integrated metrology community.

The list shows all projects coordinated within the Technical Committee for Mass and Related Quantities.

Projects TC-M

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
M 675 2002-05-01 Validation of facilities for density determination VSL completed Consultation
M 676 2002-08-26 Investigations on the force controlled piston gauge FPG8601 with non-rotating piston of nominal area 980 mm2 manufactured by DH Instruments Inc PTB completed Research
M 697 2003-02-05 Setting up of a mass lab from 1mg to 10 kg at E1 level MCCAA-SMI completed Consultation
M 702 2003-07-01 Comparison of the calibrations of high resolution hydrometers for liquid density determinations INRIM completed Comparison EUROMET.M.D-K4
M 722 2003-10-01 Bilateral pressure comparison in the range to 7 MPa, in oil INM-RO completed Comparison
M 734 2003-04-01 Study of materials for the realisation of mass standards LNE completed Research
M 740 2004-01-01 Effective area calculation, uncertainty evaluation and studies for piston-cylinder units of non-ideal geometries used in pressure balances (extended pressure range) INRIM completed Research
M 742 2003-08-15 A bilateral comparison of a 1 kg platinum standard DFM completed Research
M 761 2003-03-01 A bilateral comparison of a 1 mg - 20 kg weight set calibrated by subdivision/multiplication DFM completed Comparison
M 786 2004-12-01 Comparison of Mass Standards in Multiples and Submultiples of the Kilogram II RISE completed Comparison EUROMET.M.M-K2.1
M 788 2004-03-20 Pressure Measurements and Calculation of the Effective Area of a Transfer Piston-Cylinder Assembly from 0.05 to 1 MPa METAS completed Comparison EUROMET.M.P-S1
M 803 2004-08-20 FPG-type digital piston manometer – exchange of experiences MIKES completed Research
M 832 2004-12-01 Comparison of 50 kg weights MIKES completed Comparison
M 834 2005-06-15 Bilateral comparison in the field of pressure measurement UME completed Comparison
M 838 2005-06-20 Bilateral comparison of Force Standard Machines UME completed Comparison
M 855 2005-07-06 Comparison between NPL and INRIM in the range 3.10-4 Pa to 9.10-2 Pa NPL completed Comparison
M 858 2005-01-01 Hydrostatic weighing – exchange of experiences IPQ completed Research
M 861 2005-08-10 Comparison of standards in the pressure range 0,04 to 1,75 MPa UME completed Comparison EUROMET.M.P-S4
M 881 2005-07-01 Comparison in the range 50 MPa to 500 MPa MIKES completed Comparison EURAMET.M.P-K7
M 884 2006-01-01 Comparison of absolute pressure standards in the barometric range from 80 kPa to 110 kPa LNE completed Comparison
M 887 2006-04-01 Guidance on uncertainty calculations for force calibrations NPL completed Research
M 911 2006-07-01 Study of standard leaks performance for different gas, in the transition regime INRIM completed Research
M 921 2006-08-15 Comparison in the range -2000 Pa to +2000 Pa MIKES completed Comparison
M 922 2006-04-01 Bilateral comparison to support planned replacement of CMC entries of PTB in the range 1E-2 Pa to 2E3 Pa PTB completed Comparison EUROMET.M.P-S2
M 931 2007-04-01 Comparison of the pressure distortion coefficients of the LNE and PTB 1 GPa piston-cylinder assemblies PTB completed Comparison EURAMET.M.P-S5
M 1054 2008-06-18 Comparison, mass standards - 100g, 10g, 500µg, 200µg & 100µg NPL completed Comparison EURAMET.M.M-S2
M 1055 2008-04-21 Inter-comparison of reference-type static torque machines PTB completed Comparison EURAMET.M.T-S1
M 1091 2009-03-01 Comparison in the range (50 to 500) MPa of liquid pressure UME completed Comparison EURAMET.M.P-K13
M 1093 2008-05-19 Comparison of absolute gravimeters METAS completed Comparison EURAMET.M.G-S1
IM, M 1096 2008-04-01 SEE exercise comparison of mass standards of 1 kg and submultiples of the kilogram EIM completed Consultation
M 1179 2011-03-09 Pressure standard comparison, gas media and gauge mode, from 0,7 MPa to 7 MPa FORCE completed Comparison EURAMET.M.P-K1.c
M 1205 2011-12-01 Review of EURAMET Calibration Guideline No. 18: Guidelines on the Calibration of Non-Automatic Weighing Instruments CEM completed Consultation
M 1206 2011-11-02 Bilateral comparison in the barometric absolute pressure range 800 to 1100 hPa MIKES completed Comparison
M 1207 2011-11-02 Bilateral comparison to determine the effective area of the piston cylinder unit by cross-floating MIKES completed Comparison
M 1110 2009-06-01 Determination of magnetic properties of mass standards PTB completed Research
M 1115 2010-08-01 R-134a leak comparison in atmospheric pressure LNE completed Comparison
M 1119 2009-06-16 Knowledge transfer in the field of calibration of non-automatic weighing instruments MIRS completed Consultation
M 1120 2009-03-01 Comparison of Mass Standards for South East European Countries (SEE) BEV completed Comparison EURAMET.M.M-K4.2
M 1125 2009-10-01 Evaluation of cross-float measurements with pressure balances LNE completed Research
M 1131 2009-04-20 Comparison in the negative gauge pressure range MIKES completed Comparison EURAMET.M.P-S8
M 1141 2008-12-01 Bilateral comparison of reference-type static torque machines PTB completed Comparison EURAMET.M.T-S2
M 1210 2012-01-01 Best practice for the dissemination of the kilogram VSL completed Traceabillity
M 1151 2010-02-12 Bilateral low absolute pressure comparison between MIKES and VNIIM MIKES completed Research
M 1170 2011-01-02 Comparison in the negative gauge pressure range from -950 to 0 hPa MIKES completed Comparison EURAMET.M.P-S9
M 1186 2011-11-01 Comparison of absolute gravimeters METAS completed Comparison EURAMET.M.G-K1
M 1197 2011-06-01 Bilateral comparison of pressure in the range of 0 MPa to 50 MPa UME completed Comparison
M 1198 2011-06-01 Bilateral comparison of 20g, 500g, 10 kg standards provided by EIM BoM completed Comparison EURAMET.M.M-K2.3
M 1214 2011-10-01 Density measurement of viscous oils VSL completed Research
M 1222 2012-09-01 Comparison of 10 kg Mass Standard For south East European Countries (SEE) BEV completed Comparison EURAMET.M.M-K2.5
M 1228 2012-07-11 Bilateral comparison of 20 kg mass standard provided by DMDM DMDM completed Comparison EURAMET.M.M-S6
180 result(s)