The gateway to Europe's
integrated metrology community.

The list shows all projects coordinated within the Technical Committee for Mass and Related Quantities.

Projects TC-M

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
M 1047 2008-06-01 Comparison in the range (0.5 Pa - 15 kPa), gauge and absolute CMI completed Comparison EURAMET.M.P-K4.2010
M 1170 2011-01-02 Comparison in the negative gauge pressure range from -950 to 0 hPa MIKES completed Comparison EURAMET.M.P-S9
M 1405 2016-12-01 Comparison of absolute pressure in the range 0.1 mPa to 1 Pa PTB completed Comparison EURAMET.M.P-K15.1
M 1120 2009-03-01 Comparison of Mass Standards for South East European Countries (SEE) BEV completed Comparison EURAMET.M.M-K4.2
M 861 2005-08-10 Comparison of standards in the pressure range 0,04 to 1,75 MPa UME completed Comparison EUROMET.M.P-S4
M 1179 2011-03-09 Pressure standard comparison, gas media and gauge mode, from 0,7 MPa to 7 MPa FORCE completed Comparison EURAMET.M.P-K1.c
M 1029 2007-07-01 Bilateral comparison of 1 kg stainless steel weights MIRS completed Comparison EUROMET.M.M-K4.1
M 1186 2011-11-01 Comparison of absolute gravimeters METAS completed Comparison EURAMET.M.G-K1
M 1300 2014-01-01 Supplementary comparison of 500 kg stainless steel standard MIRS completed Comparison EURAMET.M.M-S7
M 1252 2013-06-01 Comparison in the range of 10 MPa to 100 MPa of liquid pressure UME completed Comparison EURAMET.M.P-S13
M 1428 2018-09-01 Comparison of torque standards from 100 N⋅m to 5000 N⋅m LNE in progress Comparison EURAMET.M.T-S5
M 881 2005-07-01 Comparison in the range 50 MPa to 500 MPa MIKES completed Comparison EURAMET.M.P-K7
M 931 2007-04-01 Comparison of the pressure distortion coefficients of the LNE and PTB 1 GPa piston-cylinder assemblies PTB completed Comparison EURAMET.M.P-S5
M 788 2004-03-20 Pressure Measurements and Calculation of the Effective Area of a Transfer Piston-Cylinder Assembly from 0.05 to 1 MPa METAS completed Comparison EUROMET.M.P-S1
M 1432 2018-04-16 Comparison of Absolute Gravimeters, Wettzell, Germany 2018 VÚGTK completed Comparison EURAMET.M.G-K3
M 1311 2014-05-12 Bilateral force comparison in compression at 10 kN and 20 kN LNE completed Comparison EURAMET.M.F-S4
M 1306 2013-05-01 Supplementary comparison of hydraulic gauge pressure standards from 50 MPa to 1000 MPa PTB completed Comparison EURAMET.M.P-S14
M 702 2003-07-01 Comparison of the calibrations of high resolution hydrometers for liquid density determinations INRIM completed Comparison EUROMET.M.D-K4
M 1279 2012-06-01 Comparison of 500 kg and 1000 kg weights MIKES completed Comparison EURAMET.M.M-S8
M 1055 2008-04-21 Inter-comparison of reference-type static torque machines PTB completed Comparison EURAMET.M.T-S1
M 442 1997-10-01 EUROMET key comparison in the low pressure range 1 x 10^-7 Pa to 1000 Pa LNE completed Comparison EUROMET.M.P-K1.a
M 305 1994-04-01 Comparison measurement in the pressure range 1 to 5 MPa PTB completed Comparison EUROMET.M.P-K2
M 1406 2011-12-01 Comparison of mass standards 100 mg, 10 g, 100 g, 1 kg, 10 kg and 50 kg UME completed Comparison EURAMET.M.M-S3
M 389 1996-09-01 100 MPa Hydraulic Pressure Comparison NPL completed Comparison EUROMET.M.P-K4
M 45 1992-10-31 Intercomparison in the pressure range 50-500 MPa. LNE completed Comparison EUROMET.M.P-K5
M 1444 2018-05-23 Comparison of Rockwell hardness scales INRIM completed Comparison EURAMET.M.H-S1.a.b.c
M 110 1992-02-18 Intercomparison in the pressure range 100 - 700 (1000) MPa LNE completed Comparison EUROMET.M.P-K6
M 1443 2018-10-01 Comparison of Brinell hardness scales INRIM completed Comparison EURAMET.M.H-S2.a.b
M 1445 2018-10-01 Key comparison of Vickers hardness scales INRIM completed Comparison EURAMET.M.H-K1.c
M 786 2004-12-01 Comparison of Mass Standards in Multiples and Submultiples of the Kilogram II RISE completed Comparison EUROMET.M.M-K2.1
180 result(s)