The gateway to Europe's
integrated metrology community.

The list shows all projects coordinated within the Technical Committee for Mass and Related Quantities.

Projects TC-M

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
M 1607 2024-01-10 Hybrid bilateral comparison in viscosity determination PTB in progress Comparison
M 1038 2006-08-16 Transferring knowledge on pressure balance calibration NSAI NML completed Consultation
M 143 1988-05-01 Comparison of mass and measurement techniques at 10 and 50g NPL completed Comparison
M 215 1992-06-01 Intercomparison of stainless steel kilogram standards NPL completed Comparison EUROMET.M.M-K1
M 220 1990-08-01 The harmonisation of methods of evaluating and quoting the measurement uncertainties of pressure balances NPL completed Consultation
M 389 1996-09-01 100 MPa Hydraulic Pressure Comparison NPL completed Comparison EUROMET.M.P-K4
M 441 1996-01-01 A Bi-Lateral Comparison of a 0.5 gram to 0.001 gram Weight Set. NPL completed Comparison
M 509 1999-08-01 Intercomparison of Pt-Ir kilograms standards NPL completed Research
M 510 1999-08-01 Comparison of mass standards of the kilogram (stainless steel) NPL completed Comparison EUROMET.M.M-K4
M 518 2003-01-01 An intercomparison of force standards at 50 kN and 100 kN NPL completed Comparison EUROMET.M.F-K2
M 604 2000-11-01 Comparison Issues NPL completed Research
M 855 2005-07-06 Comparison between NPL and INRIM in the range 3.10-4 Pa to 9.10-2 Pa NPL completed Comparison
M 887 2006-04-01 Guidance on uncertainty calculations for force calibrations NPL completed Research
M 1054 2008-06-18 Comparison, mass standards - 100g, 10g, 500µg, 200µg & 100µg NPL completed Comparison EURAMET.M.M-S2
M 1310 2014-02-17 Sub - milligram mass comparison NPL completed Comparison EURAMET.M.M-S9
M 1441 2017-06-01 Calibration guides for force and torque traceability NPL completed Consultation
M 1472 2019-05-01 Supplementary comparison of force standards from 10 kN to 500 kN NPL completed Comparison EURAMET.M.F-S5
M 1549 2022-03-21 Bilateral supplementary comparison in gas media (absolute mode) in the range from 10 kPa to 200 kPa MIRS/IMT/LMT in progress Comparison EURAMET.M.P-S1
M 1550 2022-03-21 Bilateral supplementary comparison in gas media (gauge mode) in the range from 0.1 MPa to 3.5 MPa MIRS/IMT/LMT in progress Comparison EURAMET.M.P-S20
M 1029 2007-07-01 Bilateral comparison of 1 kg stainless steel weights MIRS completed Comparison EUROMET.M.M-K4.1
M 1119 2009-06-16 Knowledge transfer in the field of calibration of non-automatic weighing instruments MIRS completed Consultation
M 1300 2014-01-01 Supplementary comparison of 500 kg stainless steel standard MIRS completed Comparison EURAMET.M.M-S7
M 1350 2015-01-20 Comparison of sub-multiples of the kilogram MIRS completed Comparison EURAMET.M.M-S10
M 1536 2021-09-21 Finalisation of the draft Calibration Guideline on the Calibration of Automatic Catchweighing Instruments MIRS completed Consultation
M 1662 2024-05-01 Finalisation of the draft "Guideline on the Calibration of Automatic Gravimetric Filling Instruments" MIRS in progress Consultation
M 455 1998-01-01 Intercomparison in the pressure range 50 - 350 kPa MIKES completed Comparison
M 535 2002-01-01 EUROMET Force Comparison, 5kN and 10 kN MIKES completed Comparison EUROMET.M.F-K1
M 650 2002-01-01 Interlaboratory comparison in the pressure range 0 to 13 000 Pa (differential mode), and 0,1 to 13 000 Pa (absolute mode) MIKES completed Research
M 1411 2016-09-01 Dynamic high pressure comparison MIKES concluded Comparison
M 803 2004-08-20 FPG-type digital piston manometer – exchange of experiences MIKES completed Research
M 832 2004-12-01 Comparison of 50 kg weights MIKES completed Comparison
M 881 2005-07-01 Comparison in the range 50 MPa to 500 MPa MIKES completed Comparison EURAMET.M.P-K7
M 921 2006-08-15 Comparison in the range -2000 Pa to +2000 Pa MIKES completed Comparison
M 1206 2011-11-02 Bilateral comparison in the barometric absolute pressure range 800 to 1100 hPa MIKES completed Comparison
M 1207 2011-11-02 Bilateral comparison to determine the effective area of the piston cylinder unit by cross-floating MIKES completed Comparison
M 1131 2009-04-20 Comparison in the negative gauge pressure range MIKES completed Comparison EURAMET.M.P-S8
M 1151 2010-02-12 Bilateral low absolute pressure comparison between MIKES and VNIIM MIKES completed Research
M 1170 2011-01-02 Comparison in the negative gauge pressure range from -950 to 0 hPa MIKES completed Comparison EURAMET.M.P-S9
M 1278 2012-11-01 Bilateral force and torque comparison between MIKES and PTB MIKES completed Comparison
M 1279 2012-06-01 Comparison of 500 kg and 1000 kg weights MIKES completed Comparison EURAMET.M.M-S8
M 1040 2007-07-01 Comparison in Gas Media (absolute mode) in the range from 100 µPa to 1 Pa METAS completed Comparison EURAMET.M.P-S7
M 1041 2007-07-01 Comparison in gas media (absolute and gauge mode) in the range from 25 kPa to 200 kPa METAS completed Comparison EURAMET.M.P-K8
M 339 1996-01-01 Intercomparison of volume standards by hydrostatic weighing METAS completed Comparison EUROMET.M.D-K1
M 788 2004-03-20 Pressure Measurements and Calculation of the Effective Area of a Transfer Piston-Cylinder Assembly from 0.05 to 1 MPa METAS completed Comparison EUROMET.M.P-S1
M 1093 2008-05-19 Comparison of absolute gravimeters METAS completed Comparison EURAMET.M.G-S1
M 1186 2011-11-01 Comparison of absolute gravimeters METAS completed Comparison EURAMET.M.G-K1
M 697 2003-02-05 Setting up of a mass lab from 1mg to 10 kg at E1 level MCCAA-SMI completed Consultation
M 1232 2012-05-07 Bilateral comparison of calibrations of mass standards MCCAA-SMI completed Comparison EURAMET.M.M-S4
M 519 1999-05-01 Correlations between air humidity and anormal dispersion of refractive index of air LNE-LCM/CNAM completed Research
M 551 1999-10-26 Study of several roughness measurement techniques for the characterisation of mass standard LNE-LCM/CNAM completed Research
180 result(s)