The gateway to Europe's
integrated metrology community.

The list shows all projects coordinated within the Technical Committee for Flow.

TC Flow Projects

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
F 1477 2019-05-01 Comparison of a 500 ml flask DMDM concluded Comparison
F 1533 2021-09-01 Comparison of piston-operated volumetric instruments DMDM in progress Comparison EURAMET.M.FF-S16
F 1006 2008-04-01 Inter-laboratory calibration comparison of the turbine gas meter in flow rates from 1000 m3/h to 10000 m3/h CMI completed Comparison
F 1046 2008-05-19 Inter-comparison of electromagnetic flow-meters CMI completed Comparison EURAMET.M.FF-S2
F 862 2006-03-27 Inter-laboratory calibration comparison of the turbine gas meter G650 CMI completed Comparison
F 1273 2013-05-02 Comparison of a 100 ml Volumetric Flask CMI concluded Comparison
F 1296 2014-03-17 Inter-laboratory calibration comparison of a rotary piston gas meter G650 CMI completed Comparison
F 1396 2016-04-30 Bilateral inter-comparison in the gas flow range from 1 m3/h to 250 m3/h CMI completed Comparison
F 1431 2018-01-04 Experimental study of blockage effect in wind tunnels for calibrations of anemometers CMI completed Research
F 1450 2018-06-19 Comparison of low air speed CMI completed Comparison EURAMET.M.FF-S11
F 1469 2019-07-01 Inter-comparison of calibration of a turbine gas meter G6500 CMI completed Comparison
F 1504 2021-01-01 Bilateral inter-comparison in the gas flow range from 0.002 m3/h to 2.5 m3/h with sonic nozzles CMI in progress Comparison
F 1507 2020-12-01 Comparisons of standards for liquid flow rates under static load changes CMI completed Comparison EURAMET.M.FF-S17
F 1511 2021-01-04 Bilateral inter-comparison in the gas flow range from 0.5 m3/h to 75 m3/h with sonic nozzles CMI completed Comparison
F 1565 2022-09-01 Insertion depth effect for vane anemometers CMI in progress Research
F 1590 2023-12-23 Supplementary comparison: Intercomparison of calibration of a rotary piston gas meter G650 CMI in progress Comparison EURAMET.M.FF-S20
F 1225 2013-01-31 Intercomparison of very low air speed standard facilities (0.05-1m/s) BEV/E+E completed Comparison EURAMET.M.FF-S9
F 1312 2014-07-01 Development of a guide one air speed calibration solid anemometers BEV/E+E completed Consultation
F 1454 2018-09-01 Guideline on the Calibration of Solid Anemometers - Part 2: Thermal Anemometers BEV/E+E completed Consultation
F 547 2000-01-01 Measuring systems for milk - calibration with water and milk BEV completed Comparison
F 669 2002-07-01 Intercomparison of two electromagnetic meters DN 25 BEV completed Comparison
F 799 2004-07-01 Technical characteristics and calibration capabilities of testing facilities for big water meters in Europe - Establishment of a data base BEV completed Research
F 821 2004-11-01 Bilateral comparison of the test rigs of BEV and JP Energetika Ljubljana (representative laboratory for water flow measurements in Slovenia) BEV completed Comparison
F 831 2004-01-01 Intercomparison of calibration of master meters installed in a test rig, by two independent test methods (standard capacity tanks and Brooks piston prover) BEV completed Comparison
F 854 2003-07-01 Installation effects with decrease the accuracy of water measurements BEV completed Research
F 1518 2021-02-02 Inter-comparison of gas provers in the gas flow range 0,25 m3/h to 25 m3/h BEV in progress Comparison
F 407 1997-03-01 Intercomparison of calibrations of two G 400 turbine meters assembled in series completed Comparison
127 result(s)