The gateway to Europe's
integrated metrology community.

The list shows all projects coordinated within the Technical Committee for Mass and Related Quantities.

Projects TC-M

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
M 1151 2010-02-12 Bilateral low absolute pressure comparison between MIKES and VNIIM MIKES completed Research
M 1566 2022-08-24 Bilateral key comparison in gas media (gauge mode) in the range 15 kPa to 175 kPa RISE in progress Comparison EURAMET.M.P-K8.2023
M 1311 2014-05-12 Bilateral force comparison in compression at 10 kN and 20 kN LNE completed Comparison EURAMET.M.F-S4
M 1278 2012-11-01 Bilateral force and torque comparison between MIKES and PTB MIKES completed Comparison
M 1356 2015-03-01 Bilateral comparison: density of mass standards (stainless steel 10 g, 20 g, 200 g, 1 kg) BEV completed Comparison EURAMET.M.D-S2
M 922 2006-04-01 Bilateral comparison to support planned replacement of CMC entries of PTB in the range 1E-2 Pa to 2E3 Pa PTB completed Comparison EUROMET.M.P-S2
M 1207 2011-11-02 Bilateral comparison to determine the effective area of the piston cylinder unit by cross-floating MIKES completed Comparison
M 1097 2008-09-01 Bilateral comparison on Force measurement at: 0 kN, 5 kN, 10 kN BIM concluded Comparison
M 1141 2008-12-01 Bilateral comparison of reference-type static torque machines PTB completed Comparison EURAMET.M.T-S2
M 1330 2014-08-01 Bilateral comparison of pressure standards, gas media and gauge mode from 0,7 MPa to 7 MPa LNE completed Comparison
M 1197 2011-06-01 Bilateral comparison of pressure in the range of 0 MPa to 50 MPa UME completed Comparison
M 1345 2014-05-01 Bilateral comparison of mass standards (100 mg, 2 g, 20 g, 500 g) BEV completed Comparison EURAMET.M.M-K2.6
M 838 2005-06-20 Bilateral comparison of Force Standard Machines UME completed Comparison
M 1232 2012-05-07 Bilateral comparison of calibrations of mass standards MCCAA-SMI completed Comparison EURAMET.M.M-S4
M 1198 2011-06-01 Bilateral comparison of 20g, 500g, 10 kg standards provided by EIM BoM completed Comparison EURAMET.M.M-K2.3
M 1228 2012-07-11 Bilateral comparison of 20 kg mass standard provided by DMDM DMDM completed Comparison EURAMET.M.M-S6
M 1029 2007-07-01 Bilateral comparison of 1 kg stainless steel weights MIRS completed Comparison EUROMET.M.M-K4.1
M 537 1999-06-01 Bilateral comparison linking to CCM key comparison in the pressure range up to 7 MPa CMI completed Comparison
M 834 2005-06-15 Bilateral comparison in the field of pressure measurement UME completed Comparison
M 1206 2011-11-02 Bilateral comparison in the barometric absolute pressure range 800 to 1100 hPa MIKES completed Comparison
M 1376 2015-09-01 Bilateral comparison in low gauge pressure 100 Pa to 3,5 kPa GUM concluded Comparison
M 1375 2015-09-01 Bilateral comparison in high gauge pressure 250 MPa GUM in progress Comparison EURAMET.M.P-S16
M 1070 2008-07-01 Bilateral and supplementary comparison with two SRG as transfer standard between SP and PTB RISE concluded Comparison
M 1210 2012-01-01 Best practice for the dissemination of the kilogram VSL completed Traceabillity
M 64 1990-05-01 Automatic weighing RISE completed Research
M 518 2003-01-01 An intercomparison of force standards at 50 kN and 100 kN NPL completed Comparison EUROMET.M.F-K2
M 761 2003-03-01 A bilateral comparison of a 1 mg - 20 kg weight set calibrated by subdivision/multiplication DFM completed Comparison
M 742 2003-08-15 A bilateral comparison of a 1 kg platinum standard DFM completed Research
M 441 1996-01-01 A Bi-Lateral Comparison of a 0.5 gram to 0.001 gram Weight Set. NPL completed Comparison
M 389 1996-09-01 100 MPa Hydraulic Pressure Comparison NPL completed Comparison EUROMET.M.P-K4
180 result(s)