Bilateral comparison on Force measurement at: 0 kN, 5 kN, 10 kN

Project Description

The intercomparison is organised by the pilot laboratory PTB and carried out in two laboratories. Two compression force transducers were selected by the pilot laboratory with the norminal force 20 kN (used up to 10 kN) and 10 kN.

Measurements will be performed at 0 kN, 5 kN and 10 kN.
This comparison will be linked to the corresponding CCM.F-K1.a comparison.

This comparison is organized and funded within the framework of PHARE project BG 2005/017-353.02.02, LOT 1

The technical protocol can be downloaded here>>.

Progress Report 2017-03-17

Incompleted measurements in a due time due to a complicated technical problem with the force machine at BIM which prevented the progress of the comparison. BIM suggests that the comparison should be cancelled.

Mass and Related Quantities (M)
Coordinating Institute
BIM (Bulgaria)
Participating Partners
PTB (Germany)