The gateway to Europe's
integrated metrology community.

The list shows all projects coordinated within the Technical Committee for Mass and Related Quantities.

Projects TC-M

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
M 1428 2018-09-01 Comparison of torque standards from 100 N⋅m to 5000 N⋅m LNE in progress Comparison EURAMET.M.T-S5
M 1440 2018-04-01 KC Density of liquids BEV in progress Comparison EURAMET.M.D-K5
M 1529 2021-04-01 Supplementary comparison of torque standards from 10 N.m to 500 N.m LNE in progress Comparison EURAMET.M.T-S6
M 1532 2020-11-02 Key comparison of stainless steel multiples and sub-multiples of the kilogram UME in progress Comparison EURAMET.M.M-K7
M 1549 2022-03-21 Bilateral supplementary comparison in gas media (absolute mode) in the range from 10 kPa to 200 kPa MIRS/IMT/LMT in progress Comparison EURAMET.M.P-S1
M 1550 2022-03-21 Bilateral supplementary comparison in gas media (gauge mode) in the range from 0.1 MPa to 3.5 MPa MIRS/IMT/LMT in progress Comparison EURAMET.M.P-S20
M 1555 2022-06-10 EURAMET supplementary comparison of mass standards 20 kg BEV in progress Comparison EURAMET.M.M-S11
M 1556 2022-05-22 Pilot study: Comparison for the realisation of the mass scale IMBiH in progress Comparison
M 1566 2022-08-24 Bilateral key comparison in gas media (gauge mode) in the range 15 kPa to 175 kPa RISE in progress Comparison EURAMET.M.P-K8.2023
M 1570 2022-12-01 Revision of EURAMET Calibration Guides No. 3 (Calibration of Pressure Balances) and No. 17 (Guidelines on the Calibration of Electromechanical and Mechanical Manometers) PTB in progress Consultation
M 1580 2023-02-27 EURAMET key comparison in gas media from 0.3 mPa to 1 Pa (absolute mode) INRIM in progress Comparison EURAMET.M.P-K15.2
M 1585 2022-11-01 Bilateral supplementary comparison in high gauge pressure up to 1 GPa CMI in progress Comparison
M 1596 2023-10-04 Guidelines for the uncertainty determination and calibration of torque measurements PTB in progress Consultation
M 1597 2023-10-16 Force subsequent key comparison (50 kN and 100 kN) INRIM in progress Comparison EURAMET.M.F-K2.a
M 1601 2024-01-15 Pilot study: Comparison of dynamic pressure measurements PTB in progress Comparison
M 1603 2024-05-01 Key comparison of absolute gravimeters VÚGTK in progress Comparison EURAMET.M.G-K2.2023
M 1607 2024-01-10 Hybrid bilateral comparison in viscosity determination PTB in progress Comparison
M 1620 2024-04-22 Guidelines for the traceability and uncertainty evaluation in absolute gravity measurements INRIM in progress Consultation
M 1662 2024-05-01 Finalisation of the draft "Guideline on the Calibration of Automatic Gravimetric Filling Instruments" MIRS in progress Consultation
M 285 1993-11-30 Calibration of precision force measuring devices and transfer standards of the capacities up to 16,5 MN PTB concluded Traceabillity
M 286 1993-11-30 Traceability in force measurement at national laboratory level in range up to 2 MN PTB concluded Traceabillity
M 319 1995-02-01 Implementation of procedures for the expression of uncertainty in mass calibration DFM concluded Consultation
M 402 1997-03-01 Mass mesurement (Guide to the mass determination) SMU concluded Research
M 1411 2016-09-01 Dynamic high pressure comparison MIKES concluded Comparison
M 1070 2008-07-01 Bilateral and supplementary comparison with two SRG as transfer standard between SP and PTB RISE concluded Comparison
M 1097 2008-09-01 Bilateral comparison on Force measurement at: 0 kN, 5 kN, 10 kN BIM concluded Comparison
M 1385 2016-01-02 Comparison in the negative gauge pressure range from -920 to 0 hPa. Part II LNE concluded Comparison EURAMET.M.P-S17
M 1190 2011-05-01 Calibration of hydrometers at several temperatures INRIM concluded Comparison
M 1215 2012-01-15 Primary mercury columns using floats - exchange of experiences CEM concluded Research
M 1376 2015-09-01 Bilateral comparison in low gauge pressure 100 Pa to 3,5 kPa GUM concluded Comparison
180 result(s)