The gateway to Europe's
integrated metrology community.

EURAMET Project Documents for Download

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
T 1032 2008-04-01 High-range dew-point temperature realization using two-pressure generators INTA completed Research
M 1031 2008-05-01 Key Comparison: Solid density comparison PTB completed Comparison EURAMET.M.D-K1.1
M 1030 2008-03-12 Second regional (European) Comparison of Absolute Gravimeters (ECAG-2007) INRiM completed Comparison
M 1029 2007-07-01 Bilateral key comparison of 1 kg stainless steel weights MIRS completed Comparison EUROMET.M.M-K4.1
MC 1028 2007-12-15 Bilateral comparison on synthetic natural gas VSL completed Comparison
MC 1027 2008-04-01 Comparison of combustion particle number concentration and size METAS completed Comparison
IM 1026 2007-01-01 Metrology Knowledge Transfer in the European Metrology Research Programme1 RISE completed Consultation
F 1025 2008-06-30 Harmonization of the uncertainty budget for gravimetric volume calibration IPQ concluded Research
F 1024 2008-05-01 Inter-laboratory comparison of primary low pressure gas flow standards from 25 l/min to 100 l/min MIKES completed Comparison
PR 1023 2008-02-25 Bilateral comparison of Spectral Responsivity in spectral range 300nm to 1000nm CMI completed Comparison EURAMET.PR-K2.b
T 1022 2007-11-01 Traceability of dew/frost point temperature INRiM completed Traceabillity
IR 1021 2008-03-01 Direct comparison of primary standards of absorbed dose to water in 60Co and high energy photon beams BEV completed Comparison
F 1020 2006-04-01 Coriolis Mass Flow Meter as transfer standard for multiple fluids VSL completed Research
M 1019 2007-07-01 Key comparison of density determinations of liquid samples BEV completed Comparison EURAMET.M.D-K2
TF 1018 2008-01-10 Survey of GNSS receivers in use for time transfer in T&F labs METAS completed Research
TF 1017 2008-01-10 Workshop for EURAMET T&F laboratories METAS completed Consultation
L 1016 2008-01-02 Interferometric measurements of gauge blocks DZM completed Consultation
T 1015 2008-04-01 Trilateral comparison in fixed points of Zn, SN, In, Ga and Hg CMI completed Comparison
EM 1013 2007-10-17 Peer review of the department of electrical quantities DMDM completed Consultation
L 1012 2008-02-01 Limitations of measuring methods for the depth of the groove DZM completed Research
1308 result(s)