The gateway to Europe's
integrated metrology community.

EURAMET Project Documents for Download

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
MC 696 2003-06-30 Key comparison of primary measurement procedures for pH PTB completed Comparison EUROMET.QM-K17
PR 695 2003-02-01 Development of a transportable irradiance scale for solar ultraviolet radiation measurements. PTB completed Research
PR 694 2002-08-01 Traceability of spectral transmittance Aalto concluded Traceabillity
F 692 2002-09-01 Key Comparison: Volume calibration of a 100 ml Gay-Lussac Pycnometer IPQ completed Comparison EUROMET.M.FF-K4
F 691 2002-11-01 Calibration inter-comparison of a 5-litre volume glass standard RISE completed Comparison
EM 690 2003-02-01 Bilateral comparison of DC and AC Voltage BEV completed Comparison
EM 688 2003-03-01 Supplementary Comparison: Bilateral comparison of the Measurement of Current Transformers Between UME and NCM UME completed Comparison EUROMET.EM-S19
EM 687 2002-12-01 Key Comparison: AC Power Measurements at 50 Hz (follow up to project 385) UME completed Comparison EUROMET.EM-K5.1
EM 686 2002-11-01 On the procedure to be followed when results of comparisons have been approved INRiM completed Consultation
EM 685 2003-11-01 Complex Permittivity Measurements upon Solid Dielectric Specimens at Microwave Frequencies. NPL completed Comparison
T 683 Evaluation of a national reference laboratory for Contactless-temperature measurements and primary laboratory DFM completed Consultation
EM 682 2003-01-01 Traceability of Electrical Quantities BEV ongoing Traceabillity
EM 681 Bilateral comparison on Power Measurements Between UME and PTB UME completed Research
EM 680 Microwave Power Comparison with Micro-calorimeter UME concluded Comparison
L 679 2002-06-01 Calibration of ring and plug gauges VSL completed Research
L 677 2003-01-01 Supplementary comparison of steel tape measures METAS completed Comparison EUROMET.L-S14
M 676 2002-08-26 Investigations on the force controlled piston gauge FPG8601 with non-rotating piston of nominal area 980 mm2 manufactured by DH Instruments Inc PTB completed Research
M 675 2002-05-01 Validation of facilities for density determination VSL completed Consultation
AUV 674 2003-10-01 Key comparison on calibration of LS2P microphones by the primary method of pressure reciprocity INRiM completed Comparison EUROMET.AUV.A-K3
IM 673 2002-09-01 Metrology - in short, 2nd edition DFM completed Consultation
1313 result(s)