The gateway to Europe's
integrated metrology community.

EURAMET Project Documents for Download

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
PR 1073 2008-09-01 Bilateral key comparison on Spectral regular transmittance BIM completed Comparison EURAMET.PR-K6.2
F 1072 2008-10-08 Bilateral comparison of water flow measurement standards with volume flow-rates from 0.5 m³/h to 40 m³/h and mass flow-rates from 4.36 t/h to 40 t/h VSL completed Comparison
T 1071 2008-04-01 Bilateral comparison Cu-fixed points by using Pt/Pd thermocouple VSL completed Comparison
M 1070 2008-07-01 Bilateral and supplementary comparison with two SRG as transfer standard between SP and PTB RISE concluded Comparison
F 1069 2008-09-10 Bilateral intercomparison SP-TRAPIL;hydrocarbon RISE completed Comparison
L 1068 2008-11-01 TC-L initiative to archive data of Key and Supplementary comparisons BEV completed Research
PR 1067 2008-05-31 Traceability of photometrical and radiometrical quantities between LNE-LCM/CNAM and DMDM DMDM ongoing Traceabillity
AUV 1066 2008-10-01 Bilateral Key Comparison of Accelerometer Calibration METAS completed Comparison EURAMET.AUV.V-K1.2
T 1065 2008-07-01 Survey & strategic planning in the field of measurement of moisture in materials NPL completed Research
EM 1064 2008-06-15 Spectrum of pulse generators in accordance with CISPR 16-1-1 METAS completed Comparison
L 1063 2008-08-18 EURAMET link to the CCL key comparison CCL-K11 MIKES completed Traceabillity
AUV 1062 2009-03-01 Bilateral comparison in hydrophone calibration up to 50 MHz PTB completed Comparison
T 1061 2008-09-01 Comparison of Air Temperature Calibrations MIKES completed Comparison
Q 1060 2008-10-15 Peer review of the Electrical Laboratory of the National Metrology Laboratory, Enterprise Ireland, Dublin NSAI NML completed Consultation
T 1059 2008-04-01 Proposal for RH CMC review protocol based on Euramet questionnaire MIRS/UL-FE/LMK completed Consultation
T 1058 2008-04-03 Bilateral comparison of the realisations of the ITS-90 at the mercury point DTI completed Comparison
L 1057 2008-06-01 Calibration of XXX Pin Gauges by Mechanical Probing NSAI NML completed Comparison
AUV 1056 2008-11-01 Comparison of methods to determine corrections to obtain the free-field response of a sound level meter INRiM completed Comparison
M 1055 2008-04-21 Supplementary Comparison: Inter-comparison of reference-type static torque machines PTB completed Comparison EURAMET.M.T-S1
M 1054 2008-06-18 Supplementary Comparison: Mass standards - 100g, 10g, 500µg, 200µg & 100µg NPL completed Comparison EURAMET.M.M-S2
1308 result(s)