The gateway to Europe's
integrated metrology community.

The list shows all projects coordinated within the Technical Committee for Mass and Related Quantities.

Projects TC-M

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
M 1385 2016-01-02 Supplementary Comparison in the negative gauge pressure range from -920 to 0 hPa. Part II LNE concluded Comparison EURAMET.M.P-S17
M 1376 2015-09-01 Bilateral comparison in low gauge pressure 100 Pa to 3,5 kPa GUM concluded Comparison
M 1375 2015-09-01 Bilateral supplementary comparison in high gauge pressure 250 MPa GUM completed Comparison EURAMET.M.P-S16
M 1368 2015-11-02 Key comparison of Absolute Gravimeters, Walferdange 2015 VÚGTK completed Comparison EURAMET.M.G-K2
M 1356 2015-03-01 Bilateral supplementary comparison: density of mass standards (stainless steel 10 g, 20 g, 200 g, 1 kg) BEV completed Comparison EURAMET.M.D-S2
M 1350 2015-01-20 Supplementary comparison of sub-multiples of the kilogram MIRS completed Comparison EURAMET.M.M-S10
M 1346 2014-04-11 Key comparison of 1 kg mass standards linked to CCM.M-K4 BEV completed Comparison EURAMET.M.M-K4.2015
M 1345 2014-05-01 Bilateral keycomparison of mass standards (100 mg, 2 g, 20 g, 500 g) BEV completed Comparison EURAMET.M.M-K2.6
M 1330 2014-08-01 Bilateral comparison of pressure standards, gas media and gauge mode from 0,7 MPa to 7 MPa LNE completed Comparison
M 1315 2014-09-01 Bilateral Mass comparison at 50 kg LNE completed Comparison
M 1311 2014-05-12 Supplementary Comparison: Bilateral force comparison in compression at 10 kN and 20 kN LNE completed Comparison EURAMET.M.F-S4
M 1310 2014-02-17 Supplementary Comparison: Sub - milligram mass comparison NPL completed Comparison EURAMET.M.M-S9
M 1306 2013-05-01 Supplementary comparison of hydraulic gauge pressure standards from 50 MPa to 1000 MPa PTB completed Comparison EURAMET.M.P-S14
M 1304 2014-09-15 Supplementary comparison of torque standards from 0,1 N⋅m at 50 N⋅m LNE completed Comparison EURAMET.M.T-S4
M 1300 2014-01-01 Supplementary comparison of 500 kg stainless steel standard MIRS completed Comparison EURAMET.M.M-S7
M 1279 2012-06-01 Supplementary comparison of 500 kg and 1000 kg weights MIKES completed Comparison EURAMET.M.M-S8
M 1278 2012-11-01 Bilateral force and torque comparison between MIKES and PTB MIKES completed Comparison
M 1262 2012-12-01 Supplementary Comparison: Determination of Forces (tension and compression) from 5 N up to 250 kN with two new Dead Weight Machines developed and realised by BEV BEV in progress Comparison EURAMET.M.F-S2
M 1252 2013-06-01 Supplementary comparison in the range of 10 MPa to 100 MPa of liquid pressure UME completed Comparison EURAMET.M.P-S13
M 1240 2012-10-20 Supplementary Comparison: Density determinations of liquid samples by density meters BEV completed Comparison EURAMET.M.D-S1
M 1232 2012-05-07 Bilateral supplementary comparison of calibrations of mass standards MCCAA-SMI completed Comparison EURAMET.M.M-S4
M 1228 2012-07-11 Bilateral supplementary comparison of 20 kg mass standard provided by DMDM DMDM completed Comparison EURAMET.M.M-S6
M 1222 2012-09-01 Key comparison of 10 kg Mass Standard For south East European Countries (SEE) BEV completed Comparison EURAMET.M.M-K2.5
M 1215 2012-01-15 Primary mercury columns using floats - exchange of experiences CEM concluded Research
M 1214 2011-10-01 Density measurement of viscous oils VSL completed Research
M 1210 2012-01-01 Best practice for the dissemination of the kilogram VSL completed Traceabillity
M 1207 2011-11-02 Bilateral comparison to determine the effective area of the piston cylinder unit by cross-floating MIKES completed Comparison
M 1206 2011-11-02 Bilateral comparison in the barometric absolute pressure range 800 to 1100 hPa MIKES completed Comparison
M 1205 2011-12-01 Review of EURAMET Calibration Guideline No. 18: Guidelines on the Calibration of Non-Automatic Weighing Instruments CEM completed Consultation
M 1198 2011-06-01 Bilateral key comparison of 20g, 500g, 10 kg standards provided by EIM BoM completed Comparison EURAMET.M.M-K2.3
M 1197 2011-06-01 Bilateral comparison of pressure in the range of 0 MPa to 50 MPa UME completed Comparison
M 1190 2011-05-01 Calibration of hydrometers at several temperatures INRiM concluded Comparison
M 1186 2011-11-01 Key comparison of absolute gravimeters METAS completed Comparison EURAMET.M.G-K1
M 1179 2011-03-09 Key Comparison: Pressure standard comparison, gas media and gauge mode, from 0,7 MPa to 7 MPa FORCE completed Comparison EURAMET.M.P-K1.c
M 1170 2011-01-02 Supplementary comparison in the negative gauge pressure range from -950 to 0 hPa MIKES completed Comparison EURAMET.M.P-S9
M 1151 2010-02-12 Bilateral low absolute pressure comparison between MIKES and VNIIM MIKES completed Research
M 1141 2008-12-01 Bilateral supplementary comparison of reference-type static torque machines PTB completed Comparison EURAMET.M.T-S2
M 1131 2009-04-20 Supplementary comparison in the negative gauge pressure range MIKES completed Comparison EURAMET.M.P-S8
M 1125 2009-10-01 Evaluation of cross-float measurements with pressure balances LNE completed Research
M 1120 2009-03-01 Key comparison of Mass Standards for South East European Countries (SEE) BEV completed Comparison EURAMET.M.M-K4.2
M 1119 2009-06-16 Knowledge transfer in the field of calibration of non-automatic weighing instruments MIRS completed Consultation
M 1115 2010-08-01 R-134a leak comparison in atmospheric pressure LNE completed Comparison
M 1110 2009-06-01 Determination of magnetic properties of mass standards PTB completed Research
M 1097 2008-09-01 Bilateral comparison on Force measurement at: 0 kN, 5 kN, 10 kN BIM concluded Comparison
IM, M 1096 2008-04-01 SEE exercise comparison of mass standards of 1 kg and submultiples of the kilogram EIM completed Consultation
M 1093 2008-05-19 Supplementary comparison of absolute gravimeters METAS completed Comparison EURAMET.M.G-S1
M 1091 2009-03-01 Key comparison in the range (50 to 500) MPa of liquid pressure UME completed Comparison EURAMET.M.P-K13
M 1070 2008-07-01 Bilateral and supplementary comparison with two SRG as transfer standard between SP and PTB RISE concluded Comparison
M 1055 2008-04-21 Supplementary Comparison: Inter-comparison of reference-type static torque machines PTB completed Comparison EURAMET.M.T-S1
M 1054 2008-06-18 Supplementary Comparison: Mass standards - 100g, 10g, 500µg, 200µg & 100µg NPL completed Comparison EURAMET.M.M-S2
194 result(s)