The gateway to Europe's
integrated metrology community.
Subject Reg. No. Starting TITLE Coordinating Institute Status Collaboration Type KCDB
EM 1426 2017-07-17 Comparison of S-parameter Measurements in N-type connector devices METAS completed Comparison
F 1425 2017-09-01 Calibration of micropipettes using the photometric method IPQ completed Comparison
MC 1424 2017-06-01 Supplementary comparison on Determination of Elements in River Water UME completed Comparison EURAMET.QM-S11
F 1423 2017-05-01 Revision of EURAMET Calibration Guide No. 19 - Guidelines on the Determination of Uncertainty in Gravimetric Volume Calibration IPQ completed Consultation
T 1422 2017-06-15 Bilateral key comparison of ITS-90 SPRT calibration from the Hg TP to the Zn FP JV completed Comparison EURAMET.T-K9.1
T 1421 2017-06-01 Developing primary dew-point standards - dew-point generators GUM completed Consultation
Q 1420 2017-11-01 Peer review of LNE-SYRTE's QMS LNE-OP completed Consultation
Q 1419 2017-04-10 Peer review of NSAI NML's Acoustics Laboratory NSAI NML completed Consultation
AUV 1418 2017-10-01 Key Comparison: Primary calibration of accelerometers in medium and high frequencies LNE completed Comparison EURAMET.AUV.V-K5
Q 1417 2017-10-01 Peer review of QMS of LNE-INM (CNAM) LNE-LCM/CNAM completed Consultation
M 1416 2017-03-15 Bilateral study comparison in the high vacuum range from 5E-7 Pa to 9E-4 Pa. CMI in progress Comparison
F 1415 2017-04-01 Bi-lateral comparison of standards for low-pressure gas flow VSL completed Comparison
M 1414 2015-09-15 Supplementary comparison of hydraulic pressure balance effective area determination in the range up to 80 MPa FSB-LPM completed Comparison EURAMET.M.P-S18
L 1413 2017-03-01 Key Comparison: Angle comparison using an autocollimator METAS completed Comparison EURAMET.L-K3.2009.2
PR 1412 2016-04-01 Key comparison on spectral regular transmittance LNE-LCM/CNAM in progress Comparison EURAMET.PR-K6.2015
M 1411 2016-09-01 Dynamic high pressure comparison MIKES concluded Comparison
L 1410 2016-10-10 Key Comparison: Calibration of Diameter Standards INRiM completed Comparison EURAMET.L-K4.2015
EM 1409 2016-11-14 Calibration strategies of a dual-stage transimpedance amplifier (ULCA) with 1 GΩ nominal overall transresistance PTB completed Research
Q 1408 2016-10-24 Peer review of INM (Romania) INM-RO completed Consultation
L 1407 2016-09-01 Supplementary Comparison: Measurement of groove depth standards in the range 1 µm up to 1 mm PTB completed Comparison EURAMET.L-S26
1308 result(s)