The gateway to Europe's
integrated metrology community.

The list shows all projects coordinated within the Technical Committee for Mass and Related Quantities.

Projects TC-M

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
IM, M 1096 2008-04-01 SEE exercise comparison of mass standards of 1 kg and submultiples of the kilogram EIM completed Consultation
M 1097 2008-09-01 Bilateral comparison on Force measurement at: 0 kN, 5 kN, 10 kN BIM concluded Comparison
M 1205 2011-12-01 Review of EURAMET Calibration Guideline No. 18: Guidelines on the Calibration of Non-Automatic Weighing Instruments CEM completed Consultation
M 1206 2011-11-02 Bilateral comparison in the barometric absolute pressure range 800 to 1100 hPa MIKES completed Comparison
M 1207 2011-11-02 Bilateral comparison to determine the effective area of the piston cylinder unit by cross-floating MIKES completed Comparison
M 1110 2009-06-01 Determination of magnetic properties of mass standards PTB completed Research
M 1115 2010-08-01 R-134a leak comparison in atmospheric pressure LNE completed Comparison
M 1119 2009-06-16 Knowledge transfer in the field of calibration of non-automatic weighing instruments MIRS completed Consultation
M 1125 2009-10-01 Evaluation of cross-float measurements with pressure balances LNE completed Research
M 1210 2012-01-01 Best practice for the dissemination of the kilogram VSL completed Traceabillity
M 1151 2010-02-12 Bilateral low absolute pressure comparison between MIKES and VNIIM MIKES completed Research
M 1190 2011-05-01 Calibration of hydrometers at several temperatures INRIM concluded Comparison
M 1197 2011-06-01 Bilateral comparison of pressure in the range of 0 MPa to 50 MPa UME completed Comparison
M 1214 2011-10-01 Density measurement of viscous oils VSL completed Research
M 1215 2012-01-15 Primary mercury columns using floats - exchange of experiences CEM concluded Research
M 1278 2012-11-01 Bilateral force and torque comparison between MIKES and PTB MIKES completed Comparison
M 1315 2014-09-01 Bilateral Mass comparison at 50 kg LNE completed Comparison
M 1330 2014-08-01 Bilateral comparison of pressure standards, gas media and gauge mode from 0,7 MPa to 7 MPa LNE completed Comparison
M 1376 2015-09-01 Bilateral comparison in low gauge pressure 100 Pa to 3,5 kPa GUM concluded Comparison
M 1416 2017-03-15 Bilateral study comparison in the high vacuum range from 5E-7 Pa to 9E-4 Pa. CMI in progress Comparison
M 1441 2017-06-01 Calibration guides for force and torque traceability NPL completed Consultation
M 1536 2021-09-21 Finalisation of the draft Calibration Guideline on the Calibration of Automatic Catchweighing Instruments MIRS completed Consultation
M 1556 2022-05-22 Pilot study: Comparison for the realisation of the mass scale IMBiH in progress Comparison
M 1570 2022-12-01 Revision of EURAMET Calibration Guides No. 3 (Calibration of Pressure Balances) and No. 17 (Guidelines on the Calibration of Electromechanical and Mechanical Manometers) PTB in progress Consultation
M 1585 2022-11-01 Bilateral supplementary comparison in high gauge pressure up to 1 GPa CMI in progress Comparison
M 1596 2023-10-04 Guidelines for the uncertainty determination and calibration of torque measurements PTB in progress Consultation
M 1601 2024-01-15 Pilot study: Comparison of dynamic pressure measurements PTB in progress Comparison
M 1607 2024-01-10 Hybrid bilateral comparison in viscosity determination PTB in progress Comparison
M 1620 2024-04-22 Guidelines for the traceability and uncertainty evaluation in absolute gravity measurements INRIM in progress Consultation
M 1662 2024-05-01 Finalisation of the draft "Guideline on the Calibration of Automatic Gravimetric Filling Instruments" MIRS in progress Consultation
180 result(s)