The gateway to Europe's
integrated metrology community.

The list shows all projects coordinated within the Technical Committee for Mass and Related Quantities.

Projects TC-M

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
M 1414 2015-09-15 Comparison of hydraulic pressure balance effective area determination in the range up to 80 MPa FSB-LPM completed Comparison EURAMET.M.P-S18
M 1179 2011-03-09 Pressure standard comparison, gas media and gauge mode, from 0,7 MPa to 7 MPa FORCE completed Comparison EURAMET.M.P-K1.c
IM, M 1096 2008-04-01 SEE exercise comparison of mass standards of 1 kg and submultiples of the kilogram EIM completed Consultation
M 1228 2012-07-11 Bilateral comparison of 20 kg mass standard provided by DMDM DMDM completed Comparison EURAMET.M.M-S6
M 319 1995-02-01 Implementation of procedures for the expression of uncertainty in mass calibration DFM concluded Consultation
M 592 2000-03-01 PRAQIII Intercomparison of mass measurements DFM completed Comparison
M 742 2003-08-15 A bilateral comparison of a 1 kg platinum standard DFM completed Research
M 761 2003-03-01 A bilateral comparison of a 1 mg - 20 kg weight set calibrated by subdivision/multiplication DFM completed Comparison
M 1047 2008-06-01 Comparison in the range (0.5 Pa - 15 kPa), gauge and absolute CMI completed Comparison EURAMET.M.P-K4.2010
M 461 1998-09-01 Comparison of 500 kg mass standard CMI completed Comparison EUROMET.M.M-S1
M 537 1999-06-01 Bilateral comparison linking to CCM key comparison in the pressure range up to 7 MPa CMI completed Comparison
M 1416 2017-03-15 Bilateral study comparison in the high vacuum range from 5E-7 Pa to 9E-4 Pa. CMI in progress Comparison
M 1585 2022-11-01 Bilateral supplementary comparison in high gauge pressure up to 1 GPa CMI in progress Comparison
M 1205 2011-12-01 Review of EURAMET Calibration Guideline No. 18: Guidelines on the Calibration of Non-Automatic Weighing Instruments CEM completed Consultation
M 1215 2012-01-15 Primary mercury columns using floats - exchange of experiences CEM concluded Research
M 1404 2016-07-01 Solid density comparison CEM completed Comparison EURAMET.M.D-S3
M 1198 2011-06-01 Bilateral comparison of 20g, 500g, 10 kg standards provided by EIM BoM completed Comparison EURAMET.M.M-K2.3
M 1097 2008-09-01 Bilateral comparison on Force measurement at: 0 kN, 5 kN, 10 kN BIM concluded Comparison
M 1019 2007-07-01 Comparison of density determinations of liquid samples BEV completed Comparison EURAMET.M.D-K2
M 1120 2009-03-01 Comparison of Mass Standards for South East European Countries (SEE) BEV completed Comparison EURAMET.M.M-K4.2
M 1222 2012-09-01 Comparison of 10 kg Mass Standard For south East European Countries (SEE) BEV completed Comparison EURAMET.M.M-K2.5
M 1240 2012-10-20 Density determinations of liquid samples by density meters BEV completed Comparison EURAMET.M.D-S1
M 1262 2012-12-01 Determination of Forces (tension and compression) from 5 N up to 250 kN with two new Dead Weight Machines developed and realised by BEV BEV in progress Comparison EURAMET.M.F-S2
M 1345 2014-05-01 Bilateral comparison of mass standards (100 mg, 2 g, 20 g, 500 g) BEV completed Comparison EURAMET.M.M-K2.6
M 1356 2015-03-01 Bilateral comparison: density of mass standards (stainless steel 10 g, 20 g, 200 g, 1 kg) BEV completed Comparison EURAMET.M.D-S2
M 1346 2014-04-11 Key comparison of 1 kg mass standards linked to CCM.M-K4 BEV completed Comparison EURAMET.M.M-K4.2015
M 1440 2018-04-01 KC Density of liquids BEV in progress Comparison EURAMET.M.D-K5
M 1522 2021-02-01 Key comparison on density determination of liquids by hydrostatic weighing BEV completed Comparison EURAMET.M.D-K2.1
M 1523 2021-02-01 Key comparison on density determination of liquids using oscillation type density meters BEV completed Comparison EURAMET.M.D-K2.2
M 1555 2022-06-10 EURAMET supplementary comparison of mass standards 20 kg BEV in progress Comparison EURAMET.M.M-S11
180 result(s)