The gateway to Europe's
integrated metrology community.

The list shows all projects coordinated within the Technical Committee for Flow.

TC Flow Projects

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
F 1452 2018-09-01 Comparison with 20, 50 and 250 L test measures VSL completed Comparison
F 1454 2018-09-01 Guideline on the Calibration of Solid Anemometers - Part 2: Thermal Anemometers BEV/E+E completed Consultation
F 1484 2019-03-01 Calibration of a 1000 μL air cushion pipette and a 100 ml volumetric glass flask EIM completed Comparison
F 1469 2019-07-01 Inter-comparison of calibration of a turbine gas meter G6500 CMI completed Comparison
F 1477 2019-05-01 Comparison of a 500 ml flask DMDM concluded Comparison
F 1483 2019-09-01 Revision of EURAMET Calibration Guide No. 21 - Guidelines on the Calibration of Standard Capacity Measures Using the Volumetric Method IPQ completed Consultation
F 1486 2019-09-01 Calibration of a motorised syringe (single stroke dispenser without valve) - Comparison between the procedure of ISO 8655-6 and the new working document ISO 8655-8 IPQ completed Research
F 1504 2021-01-01 Bilateral inter-comparison in the gas flow range from 0.002 m3/h to 2.5 m3/h with sonic nozzles CMI in progress Comparison
F 1506 2020-09-01 Validation of standards for liquid flow rate under dynamic flows LNE-CETIAT completed Comparison
F 1508 2020-09-01 Pilot study: Intercomparison of ultra-low liquid flow rates in range below 100 nL/min NEL completed Comparison
F 1511 2021-01-04 Bilateral inter-comparison in the gas flow range from 0.5 m3/h to 75 m3/h with sonic nozzles CMI completed Comparison
F 1515 2021-04-01 Comparison of air speed in the range of 1-40 m/s. UME completed Comparison
F 1517 2021-01-04 Pilot study on high-pressure natural gas primary calibration facilities VSL completed Comparison
F 1518 2021-02-02 Inter-comparison of gas provers in the gas flow range 0,25 m3/h to 25 m3/h BEV in progress Comparison
F 1525 2021-06-01 Evaluation of repeatability measurement procedures in gravimetric volume calibrations of glassware IPQ completed Research
F 1552 2022-04-01 EURAMET Calibration guideline on the calibration of drug delivery devices IPQ completed Consultation
F 1557 2022-05-22 Revision of EURAMET Calibration Guide No. 21 - Guidelines on the Calibration of Standard Capacity Measures Using the Volumetric Method INRIM completed Consultation
F 1565 2022-09-01 Insertion depth effect for vane anemometers CMI in progress Research
F 1587 2023-05-09 Bilateral comparison of volume using a 100 mL pycnometer VSL in progress Comparison
F 1588 2022-04-01 Explaining the process of revision of volume standards ISO 8655 and ISO 4787 IPQ completed Consultation
F 1595 2023-09-20 EURAMET Calibration guideline for the evaluation of flow-related quantities in microfluidic devices IPQ in progress Consultation
F 1602 2023-12-01 Bilateral comparison of calibration of small volume instruments IPQ completed Comparison
F 1604 2024-01-01 Revision of EURAMET Calibration Guide No. 19 'Guidelines on the Determination of Uncertainty in Gravimetric Volume Calibration' MIRS in progress Consultation
F 1608 2024-01-02 Calibration of micropipettes using the air displacement method IPQ in progress Research
F 1613 2023-11-01 Pilot study for comparison of flow quantities on microfluidic transfer standards LNE-CETIAT in progress Comparison
F 1616 2024-03-11 Bilateral hybrid comparison: High flow rate water - 150 t/h to 1200 t/h VSL in progress Comparison
F 1617 2024-03-19 Supplementary comparison: Calibration of volumetric and piston operating instruments IPQ in progress Comparison
127 result(s)