Subject Reg. No. Starting TITLE Coordinating Institute Status Collaboration Type KCDB
F 1450 2018-06-19 Comparison of low air speed CMI completed Comparison EURAMET.M.FF-S11
F 1469 2019-07-01 Inter-comparison of calibration of a turbine gas meter G6500 CMI completed Comparison
F 1504 2021-01-01 Bilateral inter-comparison in the gas flow range from 0.002 m3/h to 2.5 m3/h with sonic nozzles CMI in progress Comparison
F 1507 2020-12-01 Comparisons of standards for liquid flow rates under static load changes CMI completed Comparison EURAMET.M.FF-S17
F 1511 2021-01-04 Bilateral inter-comparison in the gas flow range from 0.5 m3/h to 75 m3/h with sonic nozzles CMI completed Comparison
IM 1551 2022-05-22 Challenges and opportunities in sensor network metrology CMI in progress Research
F 1565 2022-09-01 Insertion depth effect for vane anemometers CMI in progress Research
M 1585 2022-11-01 Bilateral supplementary comparison in high gauge pressure up to 1 GPa CMI in progress Comparison
F 1590 2023-12-23 Supplementary comparison: Intercomparison of calibration of a rotary piston gas meter G650 CMI in progress Comparison EURAMET.M.FF-S20
IR 591 2000-03-01 Measurement of nuclear decay data of U-235 CIEMAT completed Research
IR 1287 2013-04-01 Standardisation of a solution of I-129. 2012 - 2013 CIEMAT completed Comparison EURAMET.RI(II)-S6.I-129
Q 1123 2009-10-01 On-site peer review CEM, INRIM and IPQ CEM ongoing Consultation
L 588 2000-04-01 Traceability of surveying and geadetic instruments CEM completed Research
AUV 750 2003-07-01 Bilateral comparison on primary pressure calibration of LS1P and LS2P microphones. CEM completed Comparison
L 777 2004-05-17 Step gauge calibration CEM completed Comparison EUROMET.L-K5.2004
MC 880 2003-04-01 Bilateral comparison of vehicle emission standards CEM completed Comparison
MC 883 2005-11-01 Comparison of multi-component vehicle emission standards CEM completed Traceabillity "EUROMET.QM-S3
M 1205 2011-12-01 Review of EURAMET Calibration Guideline No. 18: Guidelines on the Calibration of Non-Automatic Weighing Instruments CEM completed Consultation
T 1392 2016-03-01 Comparison of the calibration of noble metal thermocouples up to 1100 ºC CEM completed Comparison EURAMET.T-S5
M 1215 2012-01-15 Primary mercury columns using floats - exchange of experiences CEM concluded Research
1220 result(s)