The gateway to Europe's
integrated metrology community.

EURAMET Project Documents for Download

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
M 1566 2022-08-24 Bilateral key comparison in gas media (gauge mode) in the range 15 kPa to 175 kPa RISE in progress Comparison EURAMET.M.P-K8.2023
EM 1567 2022-03-07 Supplementary comparison - High voltage comparison of DC ratio RISE in progress Comparison EURAMET.EM-S46
EM 1568 2022-03-07 Supplementary comparison - High voltage comparison of high resistance RISE in progress Comparison EURAMET.EM-S47
M 1570 2022-12-01 Revision of EURAMET Calibration Guides No. 3 (Calibration of Pressure Balances) and No. 17 (Guidelines on the Calibration of Electromechanical and Mechanical Manometers) PTB in progress Consultation
F 1571 2022-12-01 Supplementary bilateral comparison for small gas flow rates (2 to 1000) SCCM at STP with Laminar Flow Elements METAS in progress Comparison EURAMET.M.FF-S18
L 1572 2022-10-13 EURAMET Technical Guide on GNSS distance metrology PTB in progress Consultation
L 1573 2022-11-18 Revision of EURAMET Calibration Guide No. 6 Cylindrical Diameter Standards CEM in progress Consultation
Q 1574 2022-12-01 On-site visits by peers - Remote peer reviews of VINS VINS in progress Consultation
L 1575 2022-10-14 Revision of EURAMET Calibration Guide No.2 on Calibration of Gauge Block Comparators NPL in progress Consultation
T 1576 2023-02-01 Air Temperature Calibration System (ATCS) BEV in progress Research
Q 1577 2022-10-01 Peer review of the Quality Management System of LNE-SYRTE LNE-SYRTE in progress Consultation
PR 1578 2023-07-01 Supplementary comparison in “Fiber Wavemeters” IO-CSIC in progress Comparison
M 1580 2023-02-27 EURAMET key comparison in gas media from 0.3 mPa to 1 Pa (absolute mode) INRIM in progress Comparison EURAMET.M.P-K15.2
L 1581 2023-03-08 Supplementary comparison on gauge block calibration by mechanical comparison Metrosert in progress Comparison EURAMET.L-S2.2.n01
L 1584 2022-11-11 Revision of EURAMET Calibration Guide No.10 Pitch Diameter of Parallel Thread Gauges by Mechanical Probing METAS in progress Consultation
M 1585 2022-11-01 Bilateral supplementary comparison in high gauge pressure up to 1 GPa CMI in progress Comparison
F 1587 2023-05-09 Bilateral comparison of volume using a 100 mL pycnometer VSL in progress Comparison
EM, TF 1589 2023-05-01 Pilot Study: Comparison of Phase Noise Measurements LNE-LTFB in progress Comparison
F 1590 2023-12-23 Supplementary comparison: Intercomparison of calibration of a rotary piston gas meter G650 CMI in progress Comparison EURAMET.M.FF-S20
IR 1591 2023-09-11 Supplementary comparison - Third interlaboratory comparison of radionuclide calibrators FTMC in progress Comparison EURAMET.RI(II)-S9
1222 result(s)