Reg. No.
Coordinating Institute
Collaboration Type
M 1496 2020-03-02 Calibration of high resolution hydrometers INRIM completed Comparison EURAMET.M.D-K4.2020
L 1502 2020-03-01 Calibration of surface roughness standards PTB in progress Comparison EURAMET.L-K8.2020
EM 1492 2020-03-01 Bilateral supplementary comparison of high voltage transformer measuring systems UME in progress Comparison EURAMET.EM-S43
MC 1498 2020-03-01 Comparison of 100 µmol/mol HCl in N2 PTB completed Comparison
MC 1480 2020-02-03 Comparison for particle number concentration up to 500'000 cm-3 PTB in progress Comparison
L 1489 2020-02-01 High precision roundness measurement by error separation techniques CEM completed Comparison EURAMET.L-S30
L 1495 2020-02-01 Dissemination and verification of dimensional nanometrology technologies NPL in progress Research
Q 1499 2020-01-19 On-site peer review LGUL (Luxembourg) in the area of gravity METAS in progress Consultation
EM 1229 2020-01-01 Traceability in partial discharge (PD) apparent charge and other parameters MIKES in progress Comparison EURAMET.EM-S36
Q 1497 2019-12-20 On-site peer review ILNAS (Luxembourg) in Mass and Time & Frequency LNE completed Consultation
Q 1493 2019-12-01 On-site peer review of National Institute of Metrology of the Republic of Moldova (INM-MD) UME ongoing Consultation
F 1479 2019-11-01 Inter-comparison of 1000 L proving tank MIRS in progress Comparison EURAMET.M.FF-S14
L 1487 2019-11-01 Measurement of short gauge blocks by interferometry CEM completed Comparison EURAMET.L-K1.2019
T 1491 2019-09-10 Hybrid comparison of measurements from -100 °C to -0 °C MIRS/UL-FE/LMK completed Comparison
EM 1478 2019-09-02 Comparison Calibration of RF Current Monitoring Probe UME completed Comparison EURAMET.EM-S45
AUV 1481 2019-09-01 Supplementary comparison: Secondary calibration of accelerometers in medium frequencies BEV completed Comparison EURAMET.AUV.V-S1
M 1494 2019-09-01 Key Comparison of National Pressure Standards in the Range 1 Pa to 15 kPa of Absolute and Gauge Pressure PTB in progress Comparison EURAMET.M.P-K4.2020
F 1476 2019-09-01 Key comparison of Air flow low pressure Qmax 400 m3/h VSL in progress Comparison EURAMET.M.FF-S12
F 1483 2019-09-01 Revision of EURAMET Calibration Guide 21 IPQ completed Consultation
F 1486 2019-09-01 Calibration of a motorised syringe (single stroke dispenser without valve) - Comparison between the procedure of ISO 8655-6 and the new working document ISO 8655-8 IPQ completed Research
1160 result(s)