The gateway to Europe's
integrated metrology community.

The list shows all projects coordinated within the Technical Committee for Flow.

TC Flow Projects

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
F 1395 2016-05-01 Volume comparison at 20 L - EURAMET Regional Key Comparison of CCM.FF-K4.1.2011 INRIM completed Comparison EURAMET.M.FF-K4.1.2016
F 1399 2016-04-18 Bi-lateral comparison of 500 ml flask FORCE completed Comparison
F 1415 2017-04-01 Bi-lateral comparison of standards for low-pressure gas flow VSL completed Comparison
F 1423 2017-05-01 Revision of EURAMET Calibration Guide No. 19 - Guidelines on the Determination of Uncertainty in Gravimetric Volume Calibration IPQ completed Consultation
F 1425 2017-09-01 Calibration of micropipettes using the photometric method IPQ completed Comparison
F 1431 2018-01-04 Experimental study of blockage effect in wind tunnels for calibrations of anemometers CMI completed Research
F 1473 2018-01-08 PTB-VTT MIKES DN100 comparison MIKES completed Comparison EURAMET.M.FF-S13
F 1439 2018-03-12 Comparison of standards for liquid flow up to 28.5 t/h UME completed Comparison
F 1450 2018-06-19 Comparison of low air speed CMI completed Comparison EURAMET.M.FF-S11
F 1452 2018-09-01 Comparison with 20, 50 and 250 L test measures VSL completed Comparison
F 1454 2018-09-01 Guideline on the Calibration of Solid Anemometers - Part 2: Thermal Anemometers BEV/E+E completed Consultation
F 1484 2019-03-01 Calibration of a 1000 μL air cushion pipette and a 100 ml volumetric glass flask EIM completed Comparison
F 1469 2019-07-01 Inter-comparison of calibration of a turbine gas meter G6500 CMI completed Comparison
F 1479 2019-11-01 Inter-comparison of 1000 L proving tank MIRS completed Comparison EURAMET.M.FF-S14
F 1483 2019-09-01 Revision of EURAMET Calibration Guide No. 21 - Guidelines on the Calibration of Standard Capacity Measures Using the Volumetric Method IPQ completed Consultation
F 1486 2019-09-01 Calibration of a motorised syringe (single stroke dispenser without valve) - Comparison between the procedure of ISO 8655-6 and the new working document ISO 8655-8 IPQ completed Research
F 1506 2020-09-01 Validation of standards for liquid flow rate under dynamic flows LNE-CETIAT completed Comparison
F 1507 2020-12-01 Comparisons of standards for liquid flow rates under static load changes CMI completed Comparison EURAMET.M.FF-S17
F 1508 2020-09-01 Pilot study: Intercomparison of ultra-low liquid flow rates in range below 100 nL/min NEL completed Comparison
F 1511 2021-01-04 Bilateral inter-comparison in the gas flow range from 0.5 m3/h to 75 m3/h with sonic nozzles CMI completed Comparison
F 1515 2021-04-01 Comparison of air speed in the range of 1-40 m/s. UME completed Comparison
F 1517 2021-01-04 Pilot study on high-pressure natural gas primary calibration facilities VSL completed Comparison
F 1525 2021-06-01 Evaluation of repeatability measurement procedures in gravimetric volume calibrations of glassware IPQ completed Research
F 1552 2022-04-01 EURAMET Calibration guideline on the calibration of drug delivery devices IPQ completed Consultation
F 1557 2022-05-22 Revision of EURAMET Calibration Guide No. 21 - Guidelines on the Calibration of Standard Capacity Measures Using the Volumetric Method INRIM completed Consultation
F 1588 2022-04-01 Explaining the process of revision of volume standards ISO 8655 and ISO 4787 IPQ completed Consultation
F 1602 2023-12-01 Bilateral comparison of calibration of small volume instruments IPQ completed Comparison
127 result(s)