The gateway to Europe's
integrated metrology community.

EURAMET Project Documents for Download

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
EM 1478 2019-09-02 Comparison Calibration of RF Current Monitoring Probe UME completed Comparison EURAMET.EM-S45
F 1479 2019-11-01 Inter-comparison of 1000 L proving tank MIRS completed Comparison EURAMET.M.FF-S14
F 1483 2019-09-01 Revision of EURAMET Calibration Guide No. 21 - Guidelines on the Calibration of Standard Capacity Measures Using the Volumetric Method IPQ completed Consultation
F 1486 2019-09-01 Calibration of a motorised syringe (single stroke dispenser without valve) - Comparison between the procedure of ISO 8655-6 and the new working document ISO 8655-8 IPQ completed Research
L 1487 2019-11-01 Measurement of short gauge blocks by interferometry CEM completed Comparison EURAMET.L-K1.2019
L 1489 2020-02-01 High precision roundness measurement by error separation techniques CEM completed Comparison EURAMET.L-S30
T 1491 2019-09-10 Hybrid comparison of measurements from -100 °C to -0 °C MIRS/UL-FE/LMK completed Comparison
Q 1493 2019-12-01 On-site peer review of National Institute of Metrology of the Republic of Moldova (INM-MD) UME completed Consultation
M 1496 2020-03-02 Calibration of high resolution hydrometers INRIM completed Comparison EURAMET.M.D-K4.2020
Q 1497 2019-12-20 On-site peer review ILNAS (Luxembourg) in Mass and Time & Frequency LNE completed Consultation
MC 1498 2020-03-01 Comparison of 100 µmol/mol HCl in N2 PTB completed Comparison
F 1506 2020-09-01 Validation of standards for liquid flow rate under dynamic flows LNE-CETIAT completed Comparison
F 1508 2020-09-01 Pilot study intercomparison of ultra-low liquid flow rates in range below 100 nL/min NEL completed Comparison
Q 1510 2020-09-01 On-site visit by peers of IAEA PTB completed Consultation
F 1511 2021-01-04 Bilateral inter-comparison in the gas flow range from 0.5 m3/h to 75 m3/h with sonic nozzles CMI completed Comparison
EM 1514 2020-09-01 Comparison on material parameter measurements in the THz spectral range with optical, resonant and VNA based setups METAS completed Comparison
F 1515 2021-04-01 Comparison of air speed in the range of 1-40 m/s. UME completed Comparison
F 1517 2021-01-04 Pilot study on high-pressure natural gas primary calibration facilities VSL completed Comparison
L 1534 2021-06-18 Supplementary Comparison EURAMET.L-S26.1: Measurement of groove depth standards in the range 1 µm up to 1 mm. Follow-up of EURAMET.L-S26 MIKES completed Comparison EURAMET.L-S26.1
Q 1535 2021-10-01 On-site visits by peers of JRC-Geel in the fields of chemistry and ionising radiation SMD completed Consultation
1186 result(s)