The gateway to Europe's
integrated metrology community.

EURAMET Project Documents for Download

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
L 1223 2012-03-12 Supplementary comparison of Parallel Thread Gauges FSB-LPMD completed Comparison EURAMET.L-S21
M 1222 2012-09-01 Key comparison of 10 kg Mass Standard For south East European Countries (SEE) BEV completed Comparison EURAMET.M.M-K2.5
IR 1221 2012-09-01 Supplementary Comparison of air kerma measurements for diagnostic X-ray beam qualitiesis IAEA completed Comparison EURAMET.RI(I)-S10
MC 1220 2013-08-01 Analysis of trace-level impurities in hydrogen NPL completed Comparison
Q 1219 2012-02-08 The peer review of the QMS of the IAEA Dosimetry Laboratory IAEA completed Consultation
L 1218 2012-01-02 Key Comparison: Calibration of Gauge Blocks by Interferometry BEV completed Comparison EURAMET.L-K1.2011
EM 1217 2012-03-01 Supplementary Comparison of High-Current Ratio Standard INRiM completed Comparison EURAMET.EM-S35
PR 1216 2011-09-01 Supplementary Comparison: Inter-comparison of Chromatic Dispersion Reference Fibres between METAS and VNIIOFI METAS completed Comparison EURAMET.PR-S3
M 1215 2012-01-15 Primary mercury columns using floats - exchange of experiences CEM concluded Research
M 1214 2011-10-01 Density measurement of viscous oils VSL completed Research
EM 1213 2009-06-16 Calibration Factor of a 2.92mm Thermoelectric Power Sensor up to 40 GHz PTB completed Comparison
MC 1212 2012-01-01 Supplementary comparison on natural gases SMU completed Comparison EURAMET.QM-S9
T 1211 2011-10-01 Bilateral key comparison of triple point of water cells VSL completed Comparison EURAMET.T-K7.3
M 1210 2012-01-01 Best practice for the dissemination of the kilogram VSL completed Traceabillity
EM 1209 2011-06-15 Three-phase AC power comparison at 50 Hz EIM completed Comparison
Q 1208 2011-11-01 Peer visits and reviews of QMSs in BIM, MBM, IMBIH, BoM and DMDM DMDM ongoing Consultation
M 1207 2011-11-02 Bilateral comparison to determine the effective area of the piston cylinder unit by cross-floating MIKES completed Comparison
M 1206 2011-11-02 Bilateral comparison in the barometric absolute pressure range 800 to 1100 hPa MIKES completed Comparison
M 1205 2011-12-01 Review of EURAMET Calibration Guideline No. 18: Guidelines on the Calibration of Non-Automatic Weighing Instruments CEM completed Consultation
AUV 1204 2011-11-01 Key Comparison: Primary calibration of accelerometers at low frequencies LNE completed Comparison EURAMET.AUV.V-K3
1313 result(s)