The gateway to Europe's
integrated metrology community.

EURAMET Project Documents for Download

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
AUV 1708 2025-02-01 Key Comparison on calibration of accelerometers INRiM in progress Comparison EURAMET.AUV.V-K5.1
M 1707 2025-05-12 Pilot study: Inter-laboratory comparison in dynamic pressure in the range 0.5 MPa – 30 MPa RISE in progress Comparison
F 1706 2025-04-01 Supplementary Comparison of standards for liquid milli-micro flow rates CMI in progress Comparison EURAMET.M.FF-S24
F 1705 2025-04-07 Supplementary Comparison: Bilateral comparison of gas provers in the gas flow range from 0.35 m3/h to 25 m3/h INRiM in progress Comparison EURAMET.M.FF-S22
MC 1704 2025-09-01 Pilot Study: Comparison of nitrogen dioxide gas standards - Optical and gravimetric method PTB in progress Comparison
T 1703 2025-04-01 Key Comparison: Realisations of the ITS-90 scale over the range from the Ag fixed-point to 2600 °C LNE-LCM/CNAM in progress Comparison EURAMET.T-K10
T 1702 2025-04-01 Pilot Study for bilateral comparison of transfer standards of non-contact thermometry at a temperature range of -10 °C up to 550 °C BEV in progress Comparison
EM 1701 2025-03-10 Key Comparison of AC-DC Voltage Transfer Standards in the frequency range 1 MHz and 100 MHz CMI in progress Comparison
EM 1700 2025-03-10 Key Comparison of AC-DC Medium Voltage Transfer Standard CMI in progress Comparison
EM 1699 2025-04-07 Key Comparison of AC-DC High Voltage Transfer Standard CMI in progress Comparison
EM 1698 2025-01-02 Pilot study: Comparison of DC/AC/LI/SI high voltage measurements LCOE in progress Comparison
T 1697 2023-07-01 Pilot study: Zn fixed point realisation SMD in progress Comparison
L 1696 2025-02-01 Key Comparison: Calibration of Roundness standards GUM in progress Comparison EURAMET.L-K4.n02
Q 1695 2024-11-01 On-site peer review of ILNAS in the field of Mass and Time & Frequency METAS completed Consultation
M 1694 2025-01-06 Bilateral key comparison of gas pressure in the range 25 kPa to 200 kPa (gauge and absolute mode) and 0.7 MPa to 7 MPa (gauge mode) LEI in progress Comparison EURAMET.M.P-K8.b.2025
L 1693 2025-02-01 Supplementary Comparison: Coefficient of the thermal expansion of gauge blocks PTB in progress Comparison EURAMET.L-S2.2.n02
L 1692 2024-12-01 Overview of design of custom 1D measuring benches/rails FSB-LPMD in progress Consultation
F 1691 2025-02-01 Supplementary Comparison: Inter-comparison of calibration of a turbine gas meter G6500 VSL in progress Comparison EURAMET.M.FF-S23
M 1690 2024-12-11 Revision of the EURAMET Calibration Guide No. 14 "Guidelines on the Calibration of Static Torque Measuring Devices" RISE in progress Consultation
Q 1689 2024-11-26 On-site peer review of DSA (Norway) DSA completed Consultation
1308 result(s)