Metrology of magnetic losses in electrical steel sheets for high-efficiency energy conversion

Workshop to be held at IEEE EuroCon conference

HEFMAG Workshop: 7 July 2023, 09:00 – 13:30 CEST

EuroCon Conference: 6 – 8 July 2023

The consortium of EMPIR project Metrology of magnetic losses in electrical steel sheets for high-efficiency energy conversion (19ENG06, HEFMAG) will run a workshop entitled ‘Metrology of magnetic losses in electrical steel sheets for high-efficiency energy conversion’ at the IEEE EuroCon conference in Turin in July 2023.

Workshop draft programme:

9:00-9:30 M. Pasquale (INRIM) "Main results of the EMPIR HEFMAG project 2020-2023"

9:30-9:45 M. Ulvr "Power losses at room temperature determined with standard measurement setups"

9:45-10:00 S. Harmon/D.Brunt "Power losses under operating temperature conditions"

10:00-10:15 F. Weickert/K.Pfnuer "Alternating power losses in thin sheets up to the MHz range"

10:15-10:30 C. Appino/O.DeLaBarriere "Two-dimensional magnetisation and power losses"

10:30-11:00 Break

11:00-11:15 G. Vakil "Magnetic measurements at UNOTT"

11:15-11:30 R. Schaefer/S. Deldar "Magneto-optical measurements at IFW"

11:30-11:45 L. Morris "Development of novel indicator film device at INNOVENT"

11:45-12:00 L. Dorosinskiy "Activities at TUBITAK"

12:00-12:15 V. Neu "Scanning microscopy at IFW"

12:15-12:30 C. Ragusa /L. Solimene "Measurement and modeling activities at POLITO"

12:30-12:45 O. DeLaBarriere "Measurement and modeling at CNRS"

12:45-13:00 C. Delaunay "Comparison of 2D measurements"

13:00-13:15 K. Pfnuer "New Wattmeter setup at PTB"

13:15-13:30 N. Banu "Loss behaviour of FeCo in a wide temperature range"

This EMPIR project is co-funded by the European Union's Horizon 2020 research and innovation programme and the EMPIR Participating States