- About EURAMET
- Research & Innovation
- Metrology for Society's Challenges
- World Metrology Day 2024
- Case Studies
- EURAMET's contribution to the COVID-19 response
- SI redefinition
- World Metrology Day 2021
- Metrology for Energy
- Metrology for Health
- Metrology for Environment
- Metrology for Industry
- Measurements for New Technologies
- Future measurement standards
- Metrology and Standardisation
- EMRP Achievements
- Impact
- Technical Committees
- European Metrology Networks
- Knowledge Transfer
- Publications & Media Centre
- Search Contacts
- Publications Repository Link
Please type a search term (at least two characters)
News
26 EURAMET projects to present at CIM 2023
26 projects and 3 European Metrology Networks will be presenting at the 21st International Metrology Congress
The 21st International Metrology Congress (CIM 2023) is taking place in Lyon, France from 7 to 10 March 2023, in partnership with Global Industrie.
The congress is bringing together members of the metrology community to share their knowledge, broaden the reach of their research and build new relationships.
It’s also a great opportunity to bridge the gap between the metrology community and stakeholders from industry and academia, who can provide invaluable insights into the metrology challenges of today and the future.
Over 850 participants from 45 countries are expected to attend.
The congress will cover a broad range of themes – including machine learning, digitalisation, nanotechnology, and much more – across 200 presentations and 6 round-table sessions addressing Industry 4.0, Health, and the Green Deal.
22 EMPIR and 4 Partnership Joint Research Projects will present papers at the event.
Please find below a list of the projects and the topics they are presenting.
In addition, the three EURAMET European Metrology Networks (EMNs) for Quantum Technologies, Advanced Manufacturing and Smart Electricity Grids will present their latest developments.
Four EMNs (Climate and Ocean Observation, Pollution Monitoring, Smart Electricity Grids, Energy Gases) and one proposed EMN (Clean Energy) will also be hosting a EURAMET Networks booth during the congress to connect with stakeholders and learn about their metrology needs.
To register for the congress and see the full event programme, visit the CIM 2023 website: www.cim2023.com/en/
Standardisation
MEWS | Metrology for standardization of emerging wireless technologies |
SApHTIES
| Uncertainties of spectrophotometric pHT from fresh to sea water |
RevStdLED: project towards the revision of standards for LED lamps and luminaires performances measurements and uncertainty evaluation | |
Uncertainty of an empirical equation for primary pHT values of artificial seawater | |
MetrIAQ | Metrological sound reference products for quality assurance and quality control measures in material emissions testing |
MFMET | Establishing metrology standards in microfluidic devices |
NCIPIT | Towards measuring instruments designed for calibration |
EDC-WFD | EDC-WFD: A project that successfully improve the reliability of estrogens’ measurements in aquatic as required for regulatory monitoring |
| MeTISQ | European effort to develop metrology for the implementation security of quantum communication (an EMN-Q Project) |
Green Deal
quantiAGREMI | Toward a better monitoring of ammonia and greenhouse gases emissions from livestock production: the quantiAGREMI project. |
PlasticTrace | Metrological traceability of measurement data from nano to small-microplastics for a greener environment and food safety |
MetCCUS | Metrology support for carbon capture utilisation and storage |
Met4H2 | Measurement infrastructure for hydrogen supply chains |
Environment
MetClimVOC | ACTRIS - CiGas side-by-side interlaboratory comparison of new and classical techniques for formaldehyde measurement |
Energy
MetroHyve | Combination of OFCEAS Spectroscopy and Low-Pressure sampling, for impurities measurement in Hydrogen production & storage |
Metro-PV | Metro-PV: metrology for enhanced performance photovoltaic technologies and application (IoT) |
NanoWires | Towards calibrated measurements of dopant concentrations on vertical nanowires by scanning microwave microscopy |
Nanoelectrical characterisation of vertical nanowires used for energy harvesting | |
Hybrid metrology for nanometric energy harvesting devices |
Health
MeDDII | Validation of the Primary Nano-flow Measurement System |
Industry
Elena | ELENA: a European project for electrical nanoscale metrology in industry |
PROMETH2O | Trace water measurement at LNE-CETIAT |
A new measurement infrastructure for trace water in ultra-pure process gases | |
Trace Water Vapor Analysis with FT-IR Spectrometer | |
Determining water-vapour enhancement factors in ultra-high pure process gases at VSL | |
Futurecom | Error Analysis in VNA Based Power Sensor Calibration Method Application |
Hi-TRACE | Assessment of uncertainty associated with very high temperature thermal diffusivity measurements |
EMPRESS 2 | Phosphor Thermometry: Lifetime Calibration Curve (Mg4FGeO6: Mn) for Traceable Surface Temperature Measurement up to 400 ˚C. |
Research Potential
RealMass | Development of a comprehensive software application for realization and dissemination of the mass scale |
Recommendation for optimised weighing designs for subdivision in mass metrology | |
ProbeTrace | Investigations of precise displacement actuators to provide traceability for contact probe and stylus instruments |
Traceability for contact probe and stylus instrument measurements |
Fundamental Metrology
PhotOQuanT | Towards quantum thermometry |
SI Broader Scope
Real-K | Assigning thermodynamic temperatures to a set high-temperature fixed points in the range 1400 K to 3000 K |
Realization of Fe-C Eutectic Point at UME |
Capacity Building
TRaMM | Traceability routes for magnetic measurements |
Want to hear more about EURAMET?
EMPIR project continues dissemination activities, including the revision of the IEC 60060-1 and IEC 60060-2 standards more
Carbon dioxide, released from man-made activities, is lowering the pH of the Earth’s oceans, and impacting the health of marine organisms worldwide more
Supporting automated and reconfigurable manufacturing systems more
Working with external project Cool White to test and suggest improvements on the locally available white paints more
The project FutureEnergy has provided new calibration services for ultra-high voltages and a good practice guide on Lightning Impulse dividers more