Publications
Please find below selected publications from EURAMET's European Metrology Research Programmes (EMRP and EMPIR) and the Metrology Partnership that are related to Clean Energy:
Metrologie zur Identifikation und Charakterisierung von Materialdefekten an GaN- und SiC-Wafern
Metrologie zur Identifikation und Charakterisierung von Materialdefekten an GaN- und SiC-Wafern 1 (2005) , 2
- Type:
- Proceedings
- Project title:
- 20IND09: PowerElec: Metrology in manufacturing compound semiconductors for power electronics
- Name of Call / Funding Programme:
- EMPIR 2020: Industry
Dataset for collection of Food related CRMs
(2004)
- Type:
- Datasets
- Project title:
- 20NET02: Food-MetNet: Support for a European Metrology Network on Food Safety
- Name of Call / Funding Programme:
- EMPIR 2020: Support for Networks
- DOI
- 10.5281/zenodo.12750278
Metrological characterization of optical confocal sensors measurements (20 and 350 travel ranges)
Journal of Physics: Conference Series 483 (201) , 12
- Type:
- Article
- Project title:
- IND10: Form metrology: Optical and tactile metrology for absolute form characterization
- Name of Call / Funding Programme:
- EMRP A169: Call 2010 Industry
- DOI
- 10.1088/1742-6596/483/1/012015
New apparatus for the determination of liquid density at primary level in TUBITAK UME
International Journal of Metrology and Quality Engineering 13 (8) , 1-6
- Type:
- Article
- Project title:
- 17RPT02: rhoLiq: Establishing traceability for liquid density measurements
- Name of Call / Funding Programme:
- EMPIR 2017: Research Potential
- DOI
- 10.1051/ijmqe/2022006
Determination of voltage dependence of capacitance of 100 kV and 300 kV compressed gas capacitors using the kinetic method
22nd International Symposium on High Voltage Engineering (ISH 2021) N/A , 503 – 508
- Type:
- Datasets
- Project title:
- 19ENG02: FutureEnergy: Metrology for future energy transmission
- Name of Call / Funding Programme:
- EMPIR 2019: Energy
- DOI
- 10.1049/icp.2022.0052
Research data for "Fabrication uncertainty guided design optimization of a photonic crystal cavity by using Gaussian processes"
- Type:
- Datasets
- Project title:
- 20FUN05: SEQUME: Single- and entangled photon sources for quantum metrology
- Name of Call / Funding Programme:
- EMPIR 2020: Fundamental
- DOI
- 10.5281/zenodo.8131611
Customized Piezoresistive Microprobes for Combined Imaging of Topography and Mechanical Properties (Raw Data)
- Type:
- Datasets
- Project title:
- 17IND05: MicroProbes: Multifunctional ultrafast microprobes for on-the-machine measurements
- Name of Call / Funding Programme:
- EMPIR 2017: Industry
Dataset for "Development of an ultra-thin parallel plate ionization chamber for dosimetry in FLASH radiotherapy"
- Type:
- Datasets
- Project title:
- 18HLT04: UHDpulse: Metrology for advanced radiotherapy using particle beams with ultra-high pulse dose rates
- Name of Call / Funding Programme:
- EMPIR 2018: Health
- DOI
- 10.5281/zenodo.7768597
Summary report on the evaluation of the inter-laboratory comparison performed with the ERM and gCRMs: including information on the repeatability and reproducibility of the data and an evaluation of the major uncertainty sources in sampling, analysis and reporting, according to the EN 16516 test method
- Type:
- Datasets
- Project title:
- 20NRM04: MetrIAQ: Metrology for the determination of emissions of dangerous substances from building materials into indoor air
- Name of Call / Funding Programme:
- EMPIR 2020: Pre-Co-Normative
- DOI
- 10.5281/zenodo.12545048
CAsoft Example - Zener diode
- Type:
- Datasets
- Project title:
- 17SIP05: CASoft: Software to maximize end user uptake of conformity assessment with measurement uncertainty
- Name of Call / Funding Programme:
- EMPIR 2017: Support for Impact
- DOI
- 10.5281/zenodo.3895759