Publications
Please find below selected publications from EURAMET's European Metrology Research Programmes (EMRP and EMPIR) and the Metrology Partnership that are related to Clean Energy:
hp-finite element method for simulating light scattering from complex 3D structures
Proc SPIE 9424 (2015)
- Type:
- Proceedings
- Project title:
- IND17: Scatterometry: Metrology of small structures for the manufacturing of electronic and optical devices
- Name of Call / Funding Programme:
- EMRP A169: Call 2010 Industry
- DOI
- 10.1117/12.2085795
A method for in-situ measurement of grid impedance and load impedance at 2 k – 150 kHz
Power Electronics and ECCE Asia (ICPE-ECCE Asia), 2015 9th International Conference on 1 (2015) , 443-448
- Type:
- Proceedings
- Project title:
- IND60: EMC: Improved EMC test methods in industrial environments
- Name of Call / Funding Programme:
- EMRP A169: Call 2012 Metrology for Industry (II)
- DOI
- 10.1109/ICPE.2015.7167823
A system for in situ S-parameter measurements of MR transmit arrays
Proc. Intl. Soc. Mag. Reson. Med. 23 (2015)
- Type:
- Proceedings
- Project title:
- HLT06: MRI safety: Metrology for next-generation safety standards and equipment in MRI
- Name of Call / Funding Programme:
- EMRP A169: Call 2011 Metrology for Health
Advanced finite-element methods for design and analysis of nanooptical structures: Applications
Proc SPIE 8642 (2015)
- Type:
- Proceedings
- Project title:
- IND17: Scatterometry: Metrology of small structures for the manufacturing of electronic and optical devices
- Name of Call / Funding Programme:
- EMRP A169: Call 2010 Industry
- DOI
- 10.1117/12.2001094
20 kV AC Divider with Ratio Correction
ISH COLLECTION at eCIGRE, ref. ISH2015_520, The 19th International Symposium on High Voltage Engineering (2015) , ISH2015_520
- Type:
- Proceedings
- Project title:
- ENG61: FutureGrid: Non-conventional voltage and current sensors for future power grids
- Name of Call / Funding Programme:
- EMRP A169: Call 2013 Energy II
Rapid SAR assessment of electrically thin implantable devices using an analytical approach: Proof-of-Principle for RF heating of coronary stents at 7.0 T
Proc. Intl. Soc. Mag. Reson. Med. 23 (2015)
- Type:
- Proceedings
- Project title:
- HLT06: MRI safety: Metrology for next-generation safety standards and equipment in MRI
- Name of Call / Funding Programme:
- EMRP A169: Call 2011 Metrology for Health
Characterization of the frequency stability of an optical frequency standard at 1.39 µm based upon noise-immune cavity-enhanced optical heterodyne molecular spectroscopy
Optics Express 23 (2015)
- Type:
- Article
- Project title:
- SIB01: InK: Implementing the new kelvin
- Name of Call / Funding Programme:
- EMRP A169: Call 2011 SI Broader Scope
- DOI
- 10.1364/OE.23.001757
Microwaves and low dimension carbon: Characterisation and applications
2015 IEEE MTT-S International Microwave Workshop... (2015)
- Type:
- Article
- Project title:
- SIB51: GraphOhm: Quantum resistance metrology based on graphene
- Name of Call / Funding Programme:
- EMRP A169: Call 2012 SI Broader scope (II)
- DOI
- 10.1109/IMWS-AMP.2015.7324929
RF current measurements in implanted wires in phantoms by fiber optic current clamps
Proc. Intl. Soc. Mag. Reson. Med. 23 (2015)
- Type:
- Proceedings
- Project title:
- HLT06: MRI safety: Metrology for next-generation safety standards and equipment in MRI
- Name of Call / Funding Programme:
- EMRP A169: Call 2011 Metrology for Health
Characterization of the effects of the turbulence on the propagation of a laser beam in air
17 International Congress of Metrology (2015) , 13014 / 4 pages
- Type:
- Proceedings
- Project title:
- SIB60: Surveying: Metrology for long distance surveying
- Name of Call / Funding Programme:
- EMRP A169: Call 2012 SI Broader scope (II)
- DOI
- 10.1051/metrology/20150013014