The gateway to Europe's
integrated metrology community.

EURAMET Project Documents for Download

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
EM 645 2001-12-01 QHE resistanhce standard with DVM and JAVS readout VSL completed Research
T 655 2002-01-01 Bilateral Intercomparison of the calibration of type S thermocouples in the fixed points of Zn, Al, Ag and Au VSL completed Comparison
IM 664 2002-04-01 Internet measurement & self-calibration VSL completed Research
M 675 2002-05-01 Validation of facilities for density determination VSL completed Consultation
L 679 2002-06-01 Calibration of ring and plug gauges VSL completed Research
MC 708 2003-01-01 Equivalency of Standards and calibration facilities VSL ongoing Consultation
MC 764 2003-12-01 Standards and calibration facilities for Ammonia (NH3) VSL completed Consultation
F 800 2004-09-01 The Harmonization of Reference Values for High-Pressure Natural Gas Volume VSL completed Research
EM 818 2004-12-01 Bilateral comparison on determining the calibration factor of thermistor mounts up to 18 GHz VSL completed Comparison EUROMET.EM.RF-K8.1.CL
EM 816 2006-09-27 Intercomparison of 100 mH inductance standards VSL completed Comparison EUROMET.EM-S26
EM 835 2005-02-14 Comparison of low-ohmic resistors (100 mohm, 1 mohm, 10 mohm and 100 mohm) VSL completed Comparison
MC 900 2006-03-01 Bilateral comparison of CO in nitrogen and SO2 in air standards VSL completed Comparison
T 899 2006-06-01 Key comparison of water triple point cells (regional extension of CCT-K7) VSL completed Comparison EUROMET.T-K7
MC 919 2006-10-01 Bilateral comparison on natural gas between INTI and NMi VSL completed Consultation
MC 937 2008-01-01 Analysis of impurities in pure and balance gases used to prepare primary standard gas mixtures by the gravimetric method VSL completed Comparison EURAMET.QM-S8
T 1071 2008-04-01 Bilateral comparison Cu-fixed points by using Pt/Pd thermocouple VSL completed Comparison
F 1072 2008-10-08 Bilateral comparison of water flow measurement standards with volume flow-rates from 0.5 m³/h to 40 m³/h and mass flow-rates from 4.36 t/h to 40 t/h VSL completed Comparison
F 1075 2008-10-21 Bilateral comparison of gas flow measurement standards with volume flow-rate from 0.025 m³/h to 65 m³/h VSL completed Comparison
L 1088 2008-10-01 Towards truly 3D metrology for advanced micro-parts VSL completed Research
MC 1092 2010-11-01 Complementary comparison on ethanol in nitrogen VSL completed Comparison EURAMET.QM-K4.1
1186 result(s)