Subject Reg. No. Starting TITLE Coordinating Institute Status Collaboration Type KCDB
F 1415 2017-04-01 Bi-lateral comparison of standards for low-pressure gas flow VSL completed Comparison
M 1414 2015-09-15 Comparison of hydraulic pressure balance effective area determination in the range up to 80 MPa FSB-LPM completed Comparison EURAMET.M.P-S18
Q 1417 2017-10-01 Peer review of QMS of LNE-INM (CNAM) LNE-LCM/CNAM completed Consultation
Q 1419 2017-04-10 Peer Review of NSAI NML's Acoustics Laboratory NSAI NML completed Consultation
T 1422 2017-06-15 Bilateral comparison of ITS-90 SPRT calibration from the Hg TP to the Zn FP JV completed Comparison EURAMET.T-K9.1
Q 1420 2017-11-01 Peer Review of LNE-SYRTE's QMS LNE-SYRTE completed Consultation
F 1423 2017-05-01 Revision of EURAMET Calibration Guide No. 19 - Guidelines on the Determination of Uncertainty in Gravimetric Volume Calibration IPQ completed Consultation
F 1425 2017-09-01 Calibration of micropipettes using the photometric method IPQ completed Comparison
EM 1426 2017-07-17 Comparison of S-parameter Measurements in N-type connector devices METAS completed Comparison
T 1429 2017-11-27 Bilateral comparison on triple point cells of mercury SMU completed Comparison
Q 1430 2018-07-01 Peer Review of LCOE's QMS LCOE completed Consultation
F 1431 2018-01-04 Experimental study of blockage effect in wind tunnels for calibrations of anemometers CMI completed Research
M 1432 2018-04-16 Comparison of Absolute Gravimeters, Wettzell, Germany 2018 VÚGTK completed Comparison EURAMET.M.G-K3
IR 1435 2017-11-27 Measurement of Ho-166 specific activity under nuclear decay data CMI completed Comparison EURAMET.RI(II)-K2.Ho-166
IR 1437 2018-04-10 The follow-up interlaboratory comparison of the radionuclide calibrators FTMC completed Comparison
Q 1438 2018-04-19 On-site peer review of NSAI NML, Ireland NSAI NML completed Consultation
F 1473 2018-01-08 PTB-VTT MIKES DN100 comparison MIKES completed Comparison EURAMET.M.FF-S13
F 1439 2018-03-12 Comparison of standards for liquid flow up to 28.5 t/h UME completed Comparison
M 1441 2017-06-01 Calibration guides for force and torque traceability NPL completed Consultation
M 1443 2018-10-01 Comparison of Brinell hardness scales INRIM completed Comparison EURAMET.M.H-S2.a.b
1178 result(s)