The gateway to Europe's
integrated metrology community.

EURAMET Project Documents for Download

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
EM 1409 2016-11-14 Calibration strategies of a dual-stage transimpedance amplifier (ULCA) with 1 GΩ nominal overall transresistance PTB completed Research
T 1421 2017-06-01 Developing primary dew-point standards - dew-point generators GUM completed Consultation
F 1415 2017-04-01 Bi-lateral comparison of standards for low-pressure gas flow VSL completed Comparison
M 1416 2017-03-15 Bilateral study comparison in the high vacuum range from 5E-7 Pa to 9E-4 Pa. CMI in progress Comparison
Q 1417 2017-10-01 Peer review of QMS of LNE-INM (CNAM) LNE-LCM/CNAM completed Consultation
Q 1419 2017-04-10 Peer review of NSAI NML's Acoustics Laboratory NSAI NML completed Consultation
Q 1420 2017-11-01 Peer review of LNE-SYRTE's QMS LNE-SYRTE completed Consultation
F 1423 2017-05-01 Revision of EURAMET Calibration Guide No. 19 - Guidelines on the Determination of Uncertainty in Gravimetric Volume Calibration IPQ completed Consultation
F 1425 2017-09-01 Calibration of micropipettes using the photometric method IPQ completed Comparison
EM 1426 2017-07-17 Comparison of S-parameter Measurements in N-type connector devices METAS completed Comparison
Q 1427 2017-12-12 On-site peer review IMBiH IMBiH ongoing Consultation
T 1429 2017-11-27 Bilateral comparison on triple point cells of mercury SMU completed Comparison
Q 1430 2018-07-01 Peer review of LCOE's QMS LCOE completed Consultation
F 1431 2018-01-04 Experimental study of blockage effect in wind tunnels for calibrations of anemometers CMI completed Research
T 1434 2017-01-02 Bilateral comparison of dew-point temperatures UME in progress Comparison
IR 1437 2018-04-10 The follow-up interlaboratory comparison of radionuclide calibrators FTMC completed Comparison
Q 1438 2018-04-19 On-site peer review of NSAI NML, Ireland NSAI NML completed Consultation
F 1439 2018-03-12 Comparison of standards for liquid flow up to 28.5 t/h UME completed Comparison
M 1441 2017-06-01 Calibration guides for force and torque traceability NPL completed Consultation
T 1442 2018-03-26 Relative humidity from 10 %rh to 95 %rh at temperatures from -10 °C to 50 °C FSB-LPM in progress Comparison
1220 result(s)