The gateway to Europe's
integrated metrology community.

EURAMET Project Documents for Download

Subject
Reg. No.
Starting
TITLE
Coordinating Institute
Status
Collaboration Type
KCDB
L 1502 2020-03-01 Calibration of surface roughness standards PTB in progress Comparison EURAMET.L-K8.2020
EM 1501 2020-09-01 Technical assessment of novel digital impedance bridges INRIM in progress Research
EM 1500 2020-03-11 Bilateral key comparison of AC/DC transfer standard at low voltages BIM completed Comparison EURAMET.EM-K11.1
Q 1499 2020-01-19 On-site peer review LGUL (Luxembourg) in the area of gravity METAS in progress Consultation
MC 1498 2020-03-01 Comparison of 100 µmol/mol HCl in N2 PTB completed Comparison
Q 1497 2019-12-20 On-site peer review ILNAS (Luxembourg) in Mass and Time & Frequency LNE completed Consultation
M 1496 2020-03-02 Calibration of high resolution hydrometers INRIM completed Comparison EURAMET.M.D-K4.2020
L 1495 2020-02-01 Dissemination and verification of dimensional nanometrology technologies NPL in progress Research
M 1494 2019-09-01 Key Comparison of National Pressure Standards in the Range 1 Pa to 15 kPa of Absolute and Gauge Pressure PTB in progress Comparison EURAMET.M.P-K4.2020
Q 1493 2019-12-01 On-site peer review of National Institute of Metrology of the Republic of Moldova (INM-MD) UME completed Consultation
EM 1492 2020-03-01 Bilateral supplementary comparison of high voltage transformer measuring systems UME in progress Comparison EURAMET.EM-S43
T 1491 2019-09-10 Hybrid comparison of measurements from -100 °C to -0 °C MIRS/UL-FE/LMK completed Comparison
L 1490 2020-04-01 High precision flatness over 300 mm PTB in progress Comparison EURAMET.L-S28
L 1489 2020-02-01 High precision roundness measurement by error separation techniques CEM completed Comparison EURAMET.L-S30
L 1488 2020-06-01 Measurement of a 1 mm Stage Micrometer BEV in progress Comparison EURAMET.L-S29
L 1487 2019-11-01 Measurement of short gauge blocks by interferometry CEM completed Comparison EURAMET.L-K1.2019
F 1486 2019-09-01 Calibration of a motorised syringe (single stroke dispenser without valve) - Comparison between the procedure of ISO 8655-6 and the new working document ISO 8655-8 IPQ completed Research
TF 1485 2019-04-01 Supplementary Comparison: Time Interval Measurements GUM in progress Comparison EURAMET.TF-S1
F 1484 2019-03-01 Calibration of a 1000 μL air cushion pipette and a 100 ml volumetric glass flask EIM completed Comparison
F 1483 2019-09-01 Revision of EURAMET Calibration Guide 21 - Guidelines on the Calibration of Standard Capacity Measures Using the Volumetric Method IPQ completed Consultation
1183 result(s)