Subject Reg. No. Starting TITLE Coordinating Institute Status Collaboration Type KCDB
L 1584 2022-11-11 Revision of EURAMET Calibration Guide No.10 Pitch Diameter of Parallel Thread Gauges by Mechanical Probing METAS in progress Consultation
Q 1569 2022-11-07 On-site peer review of MIKES-Aalto MIKES completed Consultation
M 1585 2022-11-01 Bilateral supplementary comparison in high gauge pressure up to 1 GPa CMI in progress Comparison
L 1575 2022-10-14 Revision of EURAMET Calibration Guide No.2 on Calibration of Gauge Block Comparators NPL in progress Consultation
L 1572 2022-10-13 EURAMET Technical Guide on GNSS distance metrology PTB in progress Research
F 1553 2022-10-01 Supplementary comparison liquid volume – 500 mL and 5000 mL volumetric glass flasks VSL in progress Comparison EURAMET.M.FF-S19
Q 1577 2022-10-01 Peer review of the Quality Management System of LNE-SYRTE LNE-SYRTE in progress Consultation
F 1565 2022-09-01 Insertion depth effect for vane anemometers CMI in progress Research
IM 1561 2022-08-31 Comparisons as continuously evolving bilateral comparisons JV in progress Comparison
M 1566 2022-08-24 Bilateral key comparison in gas media (gauge mode) in the range 15 kPa to 175 kPa RISE in progress Comparison EURAMET.M.P-K8.2023
MC 1564 2022-08-01 Bilateral comparison: Calibration of conductivity probe in low conductivity range (20 µS/cm and 100 µS/cm) PTB completed Comparison
L 1545 2022-07-01 Key comparison on gauge block measurement by interferometry NPL in progress Comparison EURAMET.L-K1.n01
L 1547 2022-07-01 Key comparison on calibration of 1-D CMM artefacts: Step Gauges GUM in progress Comparison EURAMET.L-K5.n01
M 1555 2022-06-10 EURAMET supplementary comparison of mass standards 20 kg BEV in progress Comparison EURAMET.M.M-S11
IM 1551 2022-05-22 Challenges and opportunities in sensor network metrology CMI in progress Research
M 1556 2022-05-22 Pilot study: Comparison for the realisation of the mass scale IMBiH in progress Comparison
F 1557 2022-05-22 Revision of EURAMET Calibration Guide No. 21 - Guidelines on the Calibration of Standard Capacity Measures Using the Volumetric Method INRIM in progress Consultation
IR 1554 2022-05-16 Bilateral key comparison on Cr-51 standardisation POLATOM in progress Comparison EURAMET.RI(II)-K1.Cr-51
Q 1559 2022-05-12 Peer review of NSAI NML's Force and Torque Laboratories NSAI NML in progress Consultation
T 1560 2022-05-01 Interlaboratory comparison of moisture measurements with biomass samples LNE-CETIAT in progress Comparison
1194 result(s)