Follow-up of Euromet L-K4.2005

Project Description

Calibration of outer diameter standards: 3 Plug gauges with nominal diameters of 6 mm, 25 mm and 50 mm. 1 Sphere with a nominal diameter of 30 mm.

This project is a follow-up of EURAMET-K4.2005.

The technical protocol can be downloaded here>>

Progress Report 2019-10-08

The final report and the executive report have to be modified following the recommendations of the WG-MRA reviewers.

Length (L)
Gerard Kotte, VSL (Netherlands)
Phone: +31 15 26 91 500
Coordinating Institute
VSL (Netherlands)