Bilateral supplementary comparison on calibration of accelerometers

Project Description

The specific task of this bilateral comparison is the measurement of the magnitude of the sensitivity of one single-ended accelerometer in the medium frequency range (10 Hz to 10 kHz). The sensitivity shall be calculated as the ratio of the amplitude of the output of the accelerometer to the amplitude of the acceleration at its reference surface with secondary means in accordance with ISO 16063-21:2003 "Methods for the calibration of vibration and shock transducers - Part 21: Vibration calibration by comparison to a reference transducer".


Progress Report 2022-05-05

The following actions have been completed in accordance with the Technical Protocol of the comparison:

10. 2021 Initial measurements of the transfer standards at METAS
11. 2021 Measurements at BEV
01. 2022 Remeasurement of the transfer standards at METAS
03. 2022 Draft A prepared, reviewed and approved by participants
03. 2022 Draft B sent to TC Chair and SC Acceleration and Vibration Convener for review

Subjects
Acoustics, Ultrasound and Vibration (AUV)
Coordinating Institute
BEV (Austria)
Participating Partners
METAS (Switzerland)