Subject Reg. No. Starting TITLE Coordinating Institute Status Collaboration Type KCDB
Q 1535 2021-10-01 On-site visits by peers of JRC-Geel in the fields of chemistry and ionising radiation SMD completed Consultation
M 1536 2021-09-21 Finalisation of the draft Calibration Guideline on the Calibration of Automatic Catchweighing Instruments MIRS completed Consultation
T 1524 2021-09-01 Comparison on thermal diffusivity measurements of high conductive materials by the laser flash method LNE-LCM/CNAM in progress Comparison
L 1528 2021-09-01 Pilot study on calibration of angle encoders INRIM in progress Comparison
F 1533 2021-09-01 Comparison of piston-operated volumetric instruments DMDM in progress Comparison EURAMET.M.FF-S16
AUV 1537 2021-09-01 Bilateral supplementary comparison on calibration of accelerometers BEV completed Comparison EURAMET.AUV.V-S2
IR 1531 2021-06-21 Bilateral comparison of the H*(10) calibration coefficients for photon radiation IMBiH in progress Comparison
L 1534 2021-06-18 Supplementary comparison EURAMET.L-S26.1: Measurement of groove depth standards in the range 1 µm up to 1 mm. Follow-up of EURAMET.L-S26 MIKES completed Comparison EURAMET.L-S26.1
F 1525 2021-06-01 Evaluation of repeatability measurement procedures in gravimetric volume calibrations of glassware IPQ completed Research
F 1526 2021-06-01 Supplementary comparison of gravimetric standards for hydrogen refuelling stations LNE-LADG in progress Comparison EURAMET.M.FF-S15
L 1527 2021-06-01 Key comparison on calibration of angle standards INRIM in progress Comparison EURAMET.L-K3.01
IM 1543 2021-06-01 Calibration Guides for accredited laboratories in EURAMET member countries PTB in progress Consultation
MC 1503 2021-05-01 Key comparison automotive exhaust gases VSL completed Comparison EURAMET.QM-K3.2019
PR 1509 2021-04-01 Trilateral comparison of spectral diffuse reflectance UME in progress Comparison EURAMET.PR-K5.2022
F 1515 2021-04-01 Comparison of air speed in the range of 1-40 m/s. UME completed Comparison
M 1529 2021-04-01 Supplementary comparison of torque standards from 10 N.m to 500 N.m LNE in progress Comparison EURAMET.M.T-S6
Q 1520 2021-03-30 Online peer review of the National Metrology Institute of Lithuania FTMC in progress Consultation
TF 1519 2021-02-25 UTC(k) definition point and reference delay measurement strategies GUM in progress Research
F 1518 2021-02-02 Inter-comparison of gas provers in the gas flow range 0,25 m3/h to 25 m3/h BEV in progress Comparison
M 1522 2021-02-01 Key comparison on density determination of liquids by hydrostatic weighing BEV completed Comparison EURAMET.M.D-K2.1
1218 result(s)