Projects TC-L

Subject Reg. No. Starting Title Coordinating Institute Status Collaboration Type KCDB
L 1433 2018-01-01 Measurement of Steel Tapes of 10 m and 50 m PTB agreed/started Comparison EURAMET.L-S27
L 1413 2017-03-01 Angle comparison using an autocollimator METAS agreed/started Comparison
L 1410 2016-10-10 Calibration of Diameter Standards INRIM agreed/started Comparison EURAMET.L-K4.2015
L 1407 2016-09-01 Measurement of groove depth standards in the range 1 µm up to 1 mm PTB agreed/started Comparison EURAMET.L-S26
L, MC, Q 1373 2015-06-01 On-site visit by external technical experts in the fields of metrology in chemistry and length GUM agreed/started Consultation
L 1372 2015-04-01 Comparison for modern microscopes at research laboratories (Nordic-nano2: Step height) MIKES completed Research
L 1365 2016-01-01 Key Comparison EURAMET.L-K5.2016 Calibration of a Step Gauge NPL agreed/started Comparison EURAMET.L-K5.2016
L 1360 2015-05-01 Bilateral comparison in surface texture - roughness LNE proposed Comparison
L 1354 2015-03-01 Comparison of pocket-type laser distance measurement instruments (EDMs) CEM agreed/started Comparison EURAMET.L-S25
L 1343 2014-11-01 MacroScale conference series PTB agreed/started Research
L 1342 2014-11-01 NANOSCALE conference series PTB agreed/started Research
L 1321 2014-06-23 Bilateral comparison in angle LNE proposed Comparison EURAMET.L-K3.2009.1
L 1320 2014-06-23 Bilateral comparison in linescale LNE proposed Comparison EURAMET.L-K7.2014
L, M, Q, T, TF 1303 2015-10-01 On-site visits by external technical experts in the fields of electricity and magnetism, thermometry, time and frequency, pressure, mass and related quantities FTMC completed Consultation
L 1299 2013-10-14 Follow-up of Euromet L-K4.2005 VSL agreed/started Comparison EURAMET.L-K4.2005.1
L 1283 2012-10-29 Calibration of gauge blocks by mechanical comparison DMDM completed Comparison
L 1272 2013-05-01 Phase correction for interferometric measurement of gauge blocks CMI agreed/started Research
L 1269 2013-06-01 Comparison of high precision roundness measurements CEM agreed/started Comparison EURAMET.L-S23
L 1254 2013-04-01 Calibration of gauge blocks by mechanical comparison DTI completed Comparison EURAMET.L-S22
L 1245 2013-01-01 Key comparison on surface roughness standards METAS completed Comparison EURAMET.L-K8.2013
L 1242 2013-09-01 Measurement of areal roughness parameters PTB agreed/started Research
L 1239 2013-08-01 Measurement of surface roughness by AFM PTB agreed/started Research
L 1237 2012-08-01 Calibration of Short Gauge Blocks by Mechanical Comparison UME agreed/started Consultation
L 1223 2012-03-12 Supplementary Comparison of Parallel Thread Gauges HMI/FSB-LPMD completed Comparison EURAMET.L-S21
L 1218 2012-01-02 Calibration of Gauge Blocks by Interferometry BEV completed Comparison EURAMET.L-K1.2011
L 1196 Comparison for modern microscopes at research laboratories (Nordic-nano1: 1D-gratings) MIKES completed Research
L 1169 2011-02-01 Comparison of laser distance measuring instruments GUM agreed/started Comparison EURAMET.L-K1.2011
L 1138 2009-11-23 Comparison of gauge blocks by interferometry HMI completed Comparison EURAMET.L-K1.2
L 1124 2007-02-01 Comparison of Type F2 Software Measurement Standards for Surface Texture NPL completed Research
L 1105 2009-06-29 Bilateral comparison on micro-CMM artefacts METAS completed Research
L 1088 2008-10-01 Towards truly 3D metrology for advanced micro-parts VSL agreed/started Research
L 1087 2008-09-29 Average diameter of polymer particles with spherical form JV agreed/started Research
L 1074 2008-10-15 Angle comparison using an autocollimator PTB agreed/started Comparison EURAMET.L-K3.2009
L 1068 2008-11-01 TC-L initiative to archive data of Key and Supplementary Comparisons BEV agreed/started Research
L 1063 2008-08-18 EURAMET link to the CCL key comparison CCL-K11 MIKES agreed/started Comparison CCL-K11
L 1057 2008-06-01 Calibration of XXX Pin Gauges by Mechanical Probing NSAI NML completed Comparison
L 1053 2008-07-28 Involute Gear Artifacts PTB completed Comparison EURAMET.L-S24
L 1045 2008-12-01 Direct comparison of 3 optical femtosecond comb generators BEV completed Comparison
L 1016 2008-01-02 Interferometric measurements of gauge blocks HMI completed Consultation
L 1012 2008-02-01 Limitations of measuring methods for the depth of the groove HMI completed Research
L 1005 2007-06-14 Dimensional measurements - Using AFM and profilometers in Surface Measurement DFM completed Consultation
L 1003 2007-11-09 Intercomparison of Measurements on Surface Texture Standards LNE completed Comparison EURAMET.L-K8
L 925 2006-08-01 Intercomparison of Measurements on Step Height Standards by SPM (EURAMET.L-S15.a) PTB completed Comparison EUROMET.L-S15.a
L 914 2006-09-01 Introduction of primary standard of length into a national metrology laboratory MIRS/UM-FS/LTM completed Consultation
L 910 2006-07-07 Bilateral comparison of squareness measurements SMU completed Comparison EUROMET.L-S19
L 905 2006-08-01 Bilateral comparison of squareness measurements SMU completed Comparison EUROMET.L-S18
L 882 2006-02-01 Calibration of line scales EUROMET.L-K7 MIRS/UM-FS/LTM completed Comparison EURAMET.L-K7.2006
L 875 2005-11-01 Bilateral comparison of a tape measure METAS completed Comparison EUROMET.L-S17
L 873 2006-01-01 Absolute frequency measurements of stabilized lasers (MeP) in northern Europe for BIPM.L-K11 MIKES completed Comparison
L 871 2005-09-01 Training and practical issues in angle metrology INRIM completed Consultation
140 result(s)