The list shows all projects coordinated within the Technical Committee for Flow.

TC Flow Projects

Reg. No.
Coordinating Institute
Collaboration Type
F 1020 2006-04-01 Coriolis Mass Flow Meter as transfer standard for multiple fluids VSL completed Research
F 1025 2008-06-30 Harmonization of the uncertainty budget for gravimetric volume calibration IPQ concluded Research
F 187 1990-01-01 Development of miniaturized optical flowmeters PTB completed Research
F 271 1993-01-01 Flowmeter installation effect in gases PTB completed Research
F 799 2004-07-01 Technical characteristics and calibration capabilities of testing facilities for big water meters in Europe - Establishment of a data base BEV completed Research
F 800 2004-09-01 The Harmonization of Reference Values for High-Pressure Natural Gas Volume VSL completed Research
F 854 2003-07-01 Installation effects with decrease the accuracy of water measurements BEV completed Research
F 1158 2010-03-01 Harmonization of the uncertainty budget and calibration method for volumetric volume calibration MIRS completed Research
F 1267 2013-03-12 Harmonization of the uncertainty budgets and calibration methods for liquid flow standards LNE-CETIAT completed Research
F 1270 2013-04-15 Determination of exemplary dataset of spatial fluid velocity profiles and components of the turbulent Reynolds stress tensor in air and water downstream to special pipe configuration PTB ongoing Research
F 1301 2014-01-01 EUREGA-1 PTB ongoing Research
F 1308 2014-03-17 Comparison of air speed facilities using LDAs as reference standards METAS completed Research
F 1431 2018-01-04 Experimental study of blockage effect in wind tunnels for calibrations of anemometers CMI in progress Research
F 1486 2019-09-01 Calibration of a motorised syringe (single stroke dispenser without valve) - Comparison between the procedure of ISO 8655-6 and the new working document ISO 8655-8 IPQ completed Research
F 1525 2021-06-01 Evaluation of repeatability measurement procedures in gravimetric volume calibrations of glassware IPQ in progress Research
F 392 1996-10-16 Evaluation of Danish Primary laboratories for sub-fields within Flow. DFM completed Consultation
F, IM 1133 2009-06-22 Knowledge transfer in the field of liquid flow and volume metrology EIM completed Consultation
F 1295 2014-04-01 Guide on the calibration, operation and handling of micropipettes EIM completed Consultation
F 1312 2014-07-01 Development of a guide one air speed calibration solid anemometers BEV/E+E completed Consultation
F 1423 2017-05-01 Revision of EURAMET Calibration Guide No. 19 - Guidelines on the Determination of Uncertainty in Gravimetric Volume Calibration IPQ completed Consultation
F 1454 2018-09-01 Guideline on the Calibration of Solid Anemometers - Part 2: Thermal Anemometers BEV/E+E completed Consultation
F 1483 2019-09-01 Revision of EURAMET Calibration Guide 21 IPQ completed Consultation
F 1004 2007-07-20 Bilateral comparison of a 500 µl micropipette IPQ completed Comparison
F 1006 2008-04-01 Inter-laboratory calibration comparison of the turbine gas meter in flow rates from 1000 m3/h to 10000 m3/h CMI completed Comparison
F 1007 2007-04-10 Bilateral comparison of the turbine gas meter in flow rates from 80 m3/h to 1600 m3/h UME completed Comparison
F 1008 2007-07-20 Volume Inter-comparison at 20 L - EURAMET Regional Key-comparison of CCM.FF-K4 IPQ completed Comparison EURAMET.M.FF-K4.b
F 1024 2008-05-01 Inter-laboratory comparison of primary low pressure gas flow standards from 25 l/min to 100 l/min MIKES completed Comparison
F 1042 2008-06-01 Bilateral comparison of calibration facilities of gas meters in the flow rate range of (0.5 - 1000) m³/h METAS concluded Comparison
F 1046 2008-05-19 Inter-comparison of electromagnetic flow-meters CMI completed Comparison EURAMET.M.FF-S2
F 307 1994-11-01 Sonic Nozzle intercomparison NEL completed Comparison
F 388 1996-09-01 Intercomparison of anemometers METAS completed Comparison
F 407 1997-03-01 Intercomparison of calibrations of two G 400 turbine meters assembled in series completed Comparison
F 419 1997-09-01 Intercomparison of Calibrations of a G250 Rotary Gas Meter FORCE completed Comparison
F 425 1997-09-01 Intercomparison of Bell Provers using a transfer meter NEL completed Comparison
F 452 1998-02-01 Comparison on Uncertainty Calculations in Flow Calibration RISE completed Comparison
F 470 1998-06-01 Intercomparison of the C* calculation NEL completed Comparison
F 474 1998-09-01 Intercomparison of high pressure gas flow measurement facilities using turbine and Venturi meters NEL completed Comparison
F 491 1998-12-01 Measurement standards for the density for liquids at elevated pressure NEL completed Comparison
F 514 1999-02-01 Intercomparison of anemometer test facilities using thermal anemometers and mechanical anemometers VSL completed Comparison EUROMET.M.FF-S4
F 547 2000-01-01 Measuring systems for milk - calibration with water and milk BEV completed Comparison
F 571 2000-04-01 200 mm Water flow intercomparison NEL completed Comparison
F 572 2000-05-01 Hydrocarbon intercomparison of 100 - 150 mm turbine meter calibrations NEL completed Comparison
F 573 2000-01-01 Intercomparison of small water flow facilities NEL completed Comparison
F 574 2000-01-01 Continuation intercomparisons of water facilities using a 200 mm orifice package NEL completed Comparison
F 669 2002-07-01 Intercomparison of two electromagnetic meters DN 25 BEV completed Comparison
F 691 2002-11-01 Calibration Inter-comparison of a 5-litre volume glass standard RISE completed Comparison
F 692 2002-09-01 Volume calibration of a 100 ml Gay-Lussac Pycnometer IPQ completed Comparison EUROMET.M.FF-K4
F 793 2004-06-01 Bilateral comparison of a 100 ml Gay-Lussac Pycnometer IPQ completed Comparison
F 806 Intercomparison of low pressure gas flow facilities using a Molbloc transfer package NEL completed Comparison EUROMET.M.FF-S3
F 821 2004-11-01 Bilateral comparison of the test rigs of BEV and JP Energetika Ljubljana (representative laboratory for water flow measurements in Slovenia) BEV completed Comparison
113 result(s)