The list shows all projects coordinated within the Technical Committee for Mass and Related Quantities.

Projects TC-M

Reg. No.
Coordinating Institute
Collaboration Type
M 1523 2021-02-01 Key comparison on density determination of liquids using oscillation type density meters BEV in progress Comparison EURAMET.M.D-K2.2
M 1522 2021-02-01 Key comparison on density determination of liquids by hydrostatic weighing BEV in progress Comparison EURAMET.M.D-K2.1
M 1496 2020-03-02 Calibration of high resolution hydrometers INRIM in progress Comparison EURAMET.M.D-K4.2020
M 1494 2019-09-01 Key Comparison of National Pressure Standards in the Range 1 Pa to 15 kPa of Absolute and Gauge Pressure PTB in progress Comparison EURAMET.M.P-K4.2020
M 1472 2019-05-01 Comparison of force standards from 10 kN to 500 kN NPL completed Comparison EURAMET.M.F-S5
M 1445 2018-10-01 Comparison of Vickers hardness scales INRIM completed Comparison EURAMET.M.H-K1.c
M 1444 2018-05-23 Comparison of Rockwell hardness scales INRIM completed Comparison EURAMET.M.H-S1.a.b.c
M 1443 2018-10-01 Comparison of Brinell hardness scales INRIM in progress Comparison EURAMET.M.H-S2.a.b
M 1441 2017-06-01 Calibration guides for force and torque traceability NPL in progress Research
M 1440 2018-04-01 KC Density of liquids BEV in progress Comparison CCM.D-K5
M 1432 2018-04-16 Comparison of Absolute Gravimeters, Wettzell, Germany 2018 VÚGTK completed Comparison EURAMET.M.G-K3
M 1428 2018-09-01 Comparison of torque standards from 100 N⋅m to 5000 N⋅m LNE in progress Comparison EURAMET.M.T-S5
M 1416 2017-03-15 Bilateral study comparison in the high vacuum range from 5E-7 Pa to 9E-4 Pa. CMI in progress Comparison
M 1414 2015-09-15 Comparison of hydraulic pressure balance effective area determination in the range up to 80 MPa FSB-LPM completed Comparison EURAMET.M.P-S18
M 1411 2016-09-01 Dynamic high pressure comparison MIKES in progress Comparison
M 1406 2011-12-01 Comparison of mass standards 100 mg, 10 g, 100 g, 1 kg, 10 kg and 50 kg UME completed Comparison EURAMET.M.M-S3
M 1405 2016-12-01 Comparison of absolute pressure in the range 0.1 mPa to 1 Pa PTB completed Comparison EURAMET.M.P-K15.1
M 1404 2016-07-01 Solid density comparison CEM completed Comparison EURAMET.M.D-S3
M 1385 2016-01-02 Comparison in the negative gauge pressure range from -920 to 0 hPa. Part II LNE in progress Comparison EURAMET.M.P-S17
M 1376 2015-09-01 Bilateral comparison in low gauge pressure 100 Pa to 3,5 kPa GUM concluded Comparison
M 1375 2015-09-01 Bilateral comparison in high gauge pressure 250 MPa GUM in progress Comparison EURAMET.M.P-S16
M 1368 2015-11-02 Comparison of Absolute Gravimeters, Walferdange 2015 VÚGTK completed Comparison EURAMET.M.G-K2
M 1356 2015-03-01 Bilateral comparison: density of mass standards (stainless steel 10 g, 20 g, 200 g, 1 kg) BEV completed Comparison EURAMET.M.D-S2
M 1350 2015-01-20 Comparison of sub-multiples of the kilogram MIRS completed Comparison EURAMET.M.M-S10
M 1346 2014-04-11 Key comparison of 1 kg mass standards linked to CCM.M-K4 BEV completed Comparison EURAMET.M.M-K4.2015
M 1345 2014-05-01 Bilateral comparison of mass standards (100 mg, 2 g, 20 g, 500 g) BEV completed Comparison EURAMET.M.M-K2.6
M 1330 2014-08-01 Bilateral comparison of pressure standards, gas media and gauge mode from 0,7 MPa to 7 MPa LNE completed Comparison
M 1315 2014-09-01 Bilateral Mass comparison at 50 kg LNE completed Comparison
M 1311 2014-05-12 Bilateral force comparison in compression at 10 kN and 20 kN LNE completed Comparison EURAMET.M.F-S4
M 1310 2014-02-17 Sub - milligram mass comparison NPL completed Comparison EURAMET.M.M-S9
M 1306 2013-05-01 Supplementary comparison of hydraulic gauge pressure standards from 50 MPa to 1000 MPa PTB completed Comparison EURAMET.M.P-S14
M 1304 2014-09-15 Comparison of torque standards from 0,1 N⋅m at 50 N⋅m LNE in progress Comparison EURAMET.M.T-S4
M 1300 2014-01-01 Comparison of 500 kg stainless steel standard MIRS in progress Comparison EURAMET.M.M-S7
M 1279 2012-06-01 Comparison of 500 kg and 1000 kg weights MIKES completed Comparison EURAMET.M.M-S8
M 1278 2012-11-01 Bilateral force and torque comparison between MIKES and PTB MIKES completed Comparison
M 1262 2012-12-01 Determination of Forces (tension and compression) from 5 N up to 250 kN with two new Dead Weight Machines developed and realised by BEV BEV in progress Comparison EURAMET.M.F-S2
M 1252 2013-06-01 Comparison in the range of 10 MPa to 100 MPa of liquid pressure UME completed Comparison EURAMET.M.P-S13
M 1240 2012-10-20 Density determinations of liquid samples by density meters BEV completed Comparison EURAMET.M.D-S1
M 1232 2012-05-07 Bilateral comparison of calibrations of mass standards MCCAA-SMI completed Comparison EURAMET.M.M-S4
M 1228 2012-07-11 Bilateral comparison of 20 kg mass standard provided by DMDM DMDM completed Comparison EURAMET.M.M-S6
M 1222 2012-09-01 Comparison of 10 kg Mass Standard For south East European Countries (SEE) BEV completed Comparison EURAMET.M.M-K2.5
M 1215 2012-01-15 Primary mercury columns using floats - exchange of experiences CEM concluded Research
M 1214 2011-10-01 Density measurement of viscous oils VSL completed Research
M 1210 2012-01-01 Best practice for the dissemination of the kilogram VSL completed Traceabillity
M 1207 2011-11-02 Bilateral comparison to determine the effective area of the piston cylinder unit by cross-floating MIKES in progress Comparison
M 1206 2011-11-02 Bilateral comparison in the barometric absolute pressure range 800 to 1100 hPa MIKES in progress Comparison
M 1205 2011-12-01 Review of EURAMET Calibration Guideline No. 18: Guidelines on the Calibration of Non-Automatic Weighing Instruments CEM completed Consultation
M 1198 2011-06-01 Bilateral comparison of 20g, 500g, 10 kg standards provided by EIM BoM completed Comparison EURAMET.M.M-K2.3
M 1197 2011-06-01 Bilateral comparison of pressure in the range of 0 MPa to 50 MPa UME completed Comparison
M 1190 2011-05-01 Calibration of hydrometers at several temperatures INRIM concluded Comparison
177 result(s)