Welcome to the EURAMET Repository Link

The EURAMET Repository Link is an online service providing links to scientific papers published within the European Metrology Research Programme (EMRP), the European Metrology Programme for Innovation and Research (EMPIR) and projects funded by iMERA-Plus.

References
All :: , A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z,  , Å, Ç, Ö, Ø, Č, İ, Ś, Ş, Š, Ż, Ž,
Towards Accurate Analysis of Particle Size Distribution for Non-Spherically Shaped Nanoparticles as Quality Control Materials
Mansfeld, U., Pellegrino, F., Maurino, V., Marguet, S., Testard, F., Tache, O. and Hodoroaba, V.-D.
2019

Microscopy and Microanalysis 25 (2019) , 2328-2329

Type: 
Article
Project title: 
17NRM04: nPSize: Improved traceability chain of nanoparticle size measurements
Name of Call / Funding Programme: 
EMPIR 2017: Pre-Co-Normative
Comparison of Measuring Systems for Puncture Test According to IEC 61211
Hällström, J., Havunen, J., Yan, W., Li, Y., Vinicius, M., Filho, O. and Laiho, M.
2019

21st International Symposium on High Voltage Engineering (2019)

Type: 
Proceeding
Project title: 
15NRM02: UHV: Techniques for ultra-high voltage and very fast transients
Name of Call / Funding Programme: 
EMPIR 2015: Pre-Co-Normative
Literature review of indoor radon surveys in Europe
Vukanac, I., Živanović, M., Čeliković, I., Pantelić, G., Nikolić, J.K., Cinelli, G. and Gruber, V.
2019

JRC Technical Reports EUR 29613 (2019)

Type: 
Technical report
Project title: 
16ENV10: MetroRADON: Metrology for radon monitoring
Name of Call / Funding Programme: 
EMPIR 2016: Environment
Implementation and Analysis of a Reference Partial Discharge Measurement System
Merev, A. and Karaman, I.
2018

MAPAN 34 (2018) , 43-48

Type: 
Article
Project title: 
15NRM02: UHV: Techniques for ultra-high voltage and very fast transients
Name of Call / Funding Programme: 
EMPIR 2015: Pre-Co-Normative
Individualized magnetoencephalography using optically pumped magnetometers with an anatomy derived sensor holder
Yang, T., Brühl, R., Jodko-Władzińska, A., Cotic Smole, P., Jazbinšek, V., Trahms, L. and Sander-Thömmes, T.
2018

Biomedical Engineering / Biomedizinische Technik 63 (2018) , 240

Type: 
Article
Project title: 
HLT01: Ears: Metrology for a universal ear simulator and the perception of non-audible sound
Name of Call / Funding Programme: 
EMRP A169: Call 2011 Metrology for Health
Characterization of a fast step generator
Hällström, J., Bergman, A., Nordlund, M., Elg, A.P., Meisner, J. and Passon, S.
2017

e-cigre.org (2017)

Type: 
Proceeding
Project title: 
14IND08: ElPow: Metrology for the electrical power industry
Name of Call / Funding Programme: 
EMPIR 2014: Industry
Influence of coaxial cable on response of high voltage resistive dividers
Bergman, A., Nordlund, M., Elg, A.P., Havunen, J., Meisner, J. and Hällström, J.
2017

e-cigre.org (2017)

Type: 
Proceeding
Project title: 
14IND08: ElPow: Metrology for the electrical power industry
Name of Call / Funding Programme: 
EMPIR 2014: Industry
Using Deconvolution for Correction of Non-Ideal Step Response of Lightning Impulse Digitizers and Measurement Systems
Havunen, J., Hällström, J., Bergman, A.E. and Bergman, A.
2017

e-cigre (2017)

Type: 
Proceeding
Project title: 
14IND08: ElPow: Metrology for the electrical power industry
Name of Call / Funding Programme: 
EMPIR 2014: Industry
Altered cortical and subcortical connectivitydue to infrasound administered near thehearing threshold ± Evidence from fMRI
Weichenberger, Markus (Max Planck Institute for Human Development), Bauer, Martin, Kühler, Robert, Hensel, Johannes, Forlim, C. G., Ihlenfeld, Albrecht (Physikalisch-Technische Bundesanstalt (PTB)), Ittermann, Bernd, Gallinat, Jürgen (University Clinic Hamburg-Eppendorf), Koch, Christian and Kühn, Simone (Max Planck Institute for Human Development)
2017

PLOS ONE 12 (2017) , 1-19

Type: 
Article
Project title: 
15HLT03: Ears II: Metrology for modern hearing assessment and protecting public health from emerging noise sources
Name of Call / Funding Programme: 
EMPIR 2015: Health
Measurement of macro-scale indentation modulus using the primary hardness standard machines at INRIM
Coppola, G., Cagliefo, R., Genta, G., Maizza, G., Barbato, G., Germak, A., Origlia, C. and Schiavi, A.
2017

IMEKO 0 (2017) , 0

Type: 
Article
Project title: 
14IND03: Strength-ABLE: Metrology for length-scale engineering of materials
Name of Call / Funding Programme: 
EMPIR 2014: Industry
An investigation into a calibration scheme for a light pipe based temperature probe
Simonsen, S., Mathisen, H. and Olsen, A.A.F.
0

Measurement Science and Technology 29 (0) , 115004

Type: 
Datasets
Project title: 
17IND04: EMPRESS 2: Enhancing process efficiency through improved temperature measurement 2
Name of Call / Funding Programme: 
EMPIR 2017: Industry
First density comparison on viscoelastic samples by oscillation-type densimetry
Furtado, A., Pereira, J., Quendera, R., Schiebl, M., Lenard, E., Malejczyk, E., Alic, A., Alisic, S., Rauch, J., Lorenz, F., Bescupschii, A., Ciubara, A., Laky, B. and Amsüss, R.
0

ACTA IMEKO 9 (0) , 79-84

Type: 
Datasets
Project title: 
17RPT02: rhoLiq: Establishing traceability for liquid density measurements
Name of Call / Funding Programme: 
EMPIR 2017: Research Potential
26 RESULT(S)
Export as:
BibTeX, XML