News

Optical clock comparison shows new high accuracy, resulting in a Nature paper

Hourglass, an early timekeeping device

A recently completed EMPIR project confirms unprecedented ultra-low deviation between two independent single-ion optical clocks

The project 'Optical clocks with 1E-18 uncertainty' (15SIB03, OC18) compared two optical clocks, based on single ytterbium ions, for more than 1000 hours. The relative deviation between the "tick" rates of the clocks was found to be less than 3×10-18, in agreement with the previously estimated accuracy. This means that after approximately ten billion years these clocks would deviate from each other by one second.

The current definition of the SI second is based on energy levels in the caesium-133 atom, and the best atomic clocks that realise this definition achieve uncertainties in the range of 2×10-16. Even though this accuracy is far superior to that of all the other SI units, it needs to be improved further in order to address many of the scientific challenges emerging in modern physics.

One of those challenges is at the focus of a Nature publication that reports the ytterbium clock comparison experiment in the EMPIR project.

This new measurement not only has implications on plans to redefine the SI second but will also aid those working in fields where such very high accuracy is needed – including satellite navigation, geodetic height measurement, radio astronomy, and in some exciting quests into fundamental physics.


This EMPIR project is co-funded by the European Union's Horizon 2020 research and innovation programme and the EMPIR Participating States.

Want to hear more about EURAMET?
Sign up for EURAMET newsletters and other information

Follow us on LinkedIn and Twitter

 

Select your area of interest
EMPIR project’s AC voltage technology featured on cover of IEEE publication
2019-12-02

New project development featured by Institute of Electrical and Electronics Engineers more

Award winning EMPIR project finishes
2019-11-27

The award winning EMPIR project e-SI-Amp came to a close in 2019 more

Measuring the performance of cutting tools at extreme operating temperatures
2019-11-26

New microscopic techniques on the mechanical performance of cutting tools at their extreme operating conditions have been developed for the first time more

‘TRUTHS’ satellite for robust climate monitoring to be decided in November 2019
2019-11-25

ESA members will decide on funding for satellite mission designed to monitor Earth’s climate explicitly tied to SI – a ‘metrology laboratory in space’ more