Please type a search term (at least two characters)
European Metrology Programme for Innovation and Research (EMPIR) project Photonic and Optomechanical Sensors for Nanoscaled and Quantum Thermometry (17FUN05, PhotOQuant) is working to design, fabricate, and characterise different optomechanical systems for temperature measurement. Calibration methods will also be developed to make the sensors traceable to the International Temperature Scale of 1990 (ITS-90).
For a wide range of processes, from consumer electronics to space instrumentation, there is a growing need to make temperature measurements at smaller scales. The range of thermometers available prior to this project, however, could not meet this challenge. Nanotechnology now offers the possibility of innovative ‘optomechanical’ sensors capable of measuring temperature on micrometre length scales. Not only could these new temperature sensors replace the standard high-accuracy platinum resistance thermometers but, embedded into production processes, many industrial users could benefit from the technology.
Photonic sensors use light-matter interaction to measure temperature and other physical quantities via temperature-dependent material properties. A particularly promising new development is the possibility of using optomechanical sensors to produce quantum primary standards. Photonic and optomechanical temperature sensors enable a spatial resolution adapted for the measurement of temperature at micrometer length scale where usual sensors are unsuitable.
New optomechanical resonator fabricated
As part of this EMPIR project, a state of the art optomechanical resonator has been fabricated with extremely efficient photonic shielding. This device enables a new generation of quantum temperature standards for use in ambient environments.
Project coordinator Stéphan Briaudeau from LNE said
‘Such a high quality device enables high optomechanical coupling and thus efficient optical transduction of the thermal vibrations for their optical detection’.
Beyond sensing capability on the micro- and nano-scale, other advantages of this new sensor include reduced cost, better portability and robustness, and increased resistance to mechanical shock and electrical interference. Additionally, optomechanical sensors could be developed as a future quantum-based primary standard for temperature measurement.
This EMPIR project is co-funded by the European Union's Horizon 2020 research and innovation programme and the EMPIR Participating States.
Want to hear more about EURAMET?
Sign up for EURAMET newsletters and other information
Follow us on LinkedIn and Twitter
The process for evaluating the 2021 Call for proposals (Stage 2) has been finalised more
EMPIR project outputs contribute to the world’s first international standard in this field more
EURAMET announces the launch of the 2022 Call for Needs, within the European Partnership on Metrology more
Establishing SI linked quantum traceability by exploiting the potential of graphene more
Project is working to develop new test methods for high-frequency interference over electricity grids more