EMPIR project publishes two ISO technical specifications

EUV lithography

Specifications fulfil demonstrated end user need

EMPIR project Quadrupole mass spectrometers and outgassing rates for assessing the quality of vacuum environments (14SIP01 Vacuum ISO) was set up to develop two technical specifications. The need for the measurement guidance in these specifications was demonstrated in an end user questionnaire (part of previous project IND12) completed by industry representatives.

In addition, previous EMRP project Vacuum metrology for production environments (IND12 Vacuum) highlighted several measurement problems for quadrupole mass spectrometers (QMS), some of which can only be solved by standardised procedures.

 QMS are a type of mass analyser used to measure partial pressures in the vacuum of high energy accelerators and fusion machines, and during the production of semiconductors and coatings.

 The technical specifications developed in the project are:

  • ISO TS 20175 which deals with how to characterise and calibrate quadrupole mass spectrometers for partial pressure measurement
  • ISO TS 20177 which describes procedures for traceable outgassing rate measurements

These two technical specifications, closely related to each other, will enable the improvement of materials for vacuum, used for example for high volume manufacturing of semiconductor chips, and make the control of partial pressures in industrial processes more reliable. The technical specifications will also help manufacturers of QMS to improve the measurement performance of these devices.

The project started in May 2015 and ended successfully in April 2018. Both published technical specifications are available from the International Organisation for Standardisation (ISO) and companies are already looking at how to implement them into their working practices.

The EMPIR project is co-funded by the European Union's Horizon 2020 research and innovation programme and the EMPIR Participating States.
The EMRP is jointly funded by the EMRP participating countries within EURAMET and the European Union.

Want to hear more about EURAMET?
Sign up for EURAMET newsletters and other information

Select your area of interest
Newly developed sensor will support advances in temperature measurement

EMPIR project develops optomechanical sensor for nanoscale and quantum thermometry more

Jörn Stenger is EURAMET’s new Chairperson

German Delegate started 3-year term at the General Assembly 2021 more

New international standard on magnetic measurements and open access software

EMPIR project contributes to the world’s first international standard in small magnetic measurements and produces guides and software to ensure compli... more

Measurement traceability for 3D printed medical implants

EMPIR project brings measurement traceability to additively manufactured medical implants that have the potential to revolutionise medicine more

EURAMET Online Workshop: 2021 Call for Small Collaborative Projects (SCPs)

Registration is open for the EURAMET Online Workshop: 2021 Call for Small Collaborative Projects (SCPs) more

Page 1 of 172.